Sign in to follow this  
pedro

[MOC] BARC speeder

Recommended Posts

indexed.gif

Ladies, gents...

I'd like to share one of my more recent MOCs, my version of the BARC speeder.

The Biker Advanced Recon Commando (BARC) speeder was a powerful speeder bike model used by the Grand Army of the Republic as a reconnaissance craft during the Clone Wars. It was manufactured by Aratech Repulsor Company.

They were powered by repulsors and a turbine engine mounted on the frontal prong. The speeder was controlled via twin steering vanes atop the bike, and pedals fitted below. Two blaster cannons protruded from the bottom of the forward prong, while two more were fixed on either side of the vehicle's rear.

The speeders were capable of flying at high altitudes and were sometimes used as escorts for LAAT/i gunships carrying important passengers.

BARC speeder

barc-01.jpg

Side

barc-03.jpg

Rear

barc-04.jpg

Three quarter angle

barc-02.jpg

Originally I'd been tinkering with creating my own version of the Flitknot and somehow ended up with this! There's a couple of areas where I've used a little artistic license such as the front engine and prong.

My Bricklink link below will take you to my Star Wars folder - the BARC speeder folder is in there with more pictures (when moderated).

Comments, criticism welcome as ever.

Edited by KimT

Share this post


Link to post
Share on other sites

Great MOC, pedro. :thumbup:

You've cut down the official design a lot and made it look much better. As always, the pictures are wonderful and great quality.

Keep up the good work. :classic:

Share this post


Link to post
Share on other sites
Great MOC, pedro. :thumbup:

You've cut down the official design a lot and made it look much better. As always, the pictures are wonderful and great quality.

Keep up the good work. :classic:

Couldn't have said it better myself. :classic:

Great work Pedro. :thumbup:

Share this post


Link to post
Share on other sites

Cheers lads :wink:

As always, the pictures are wonderful and great quality.

I borrowed a work colleague's camera today and got snappy during my lunch-break!

Share this post


Link to post
Share on other sites

That's a nice speeder! I love that shield used at the front and rear. :cry_happy:

I borrowed a work colleague's camera today and got snappy during my lunch-break!

I was about to ask you this question on your camera, and it seemed I have gotten your answer. :tongue:

Share this post


Link to post
Share on other sites

Hello!

This is truly an impressive little creation! :classic: You used many nice tricks here like the rare connection of the vbars with the binoculars which works wonderfully here. I also always like to see those new grilled slopes and the potential this new part has. :classic:

Cheers,

~ Christopher

Share this post


Link to post
Share on other sites

Another impressive MOC from pedro! :laugh:

I like the shape of the whole thing, and those greebles (cheese graters and pneumatic T-pieces) make it look much better than the official one in the Clone Turbo Tank.

Your pictures are looking good, too! :thumbup:

Keep up the great work!

Share this post


Link to post
Share on other sites

Exceptional work as always pedro. :sweet: It's more accurate then TLG's. Your techniques are superb. Great job! :thumbup:

Share this post


Link to post
Share on other sites

I love the BARC Pedro. :thumbup:

About a year ago I built a BARC myself and this reminds me of it a lot.

Clever technique on the handlebars though, I hadn't thought of that!

Edited by Clone Commander Assassin

Share this post


Link to post
Share on other sites

The speeder is fantastic Pedro :thumbup:. I really like how you used the droid arms for the accelerators.

Are the prints official or did you do them yourself?

Share this post


Link to post
Share on other sites
Are the prints official or did you do them yourself?

Those are from the official BARC speeder.

51332BV77AL.jpg

Share this post


Link to post
Share on other sites

Cheers for the comments everyone :sweet:

I love that shield used at the front and rear.
Are the prints official or did you do them yourself?
Those are from the official BARC speeder.

The steering vanes (shields!) do indeed come from the official version and so were perfect for this MOC. The only niggle I have is that the detail on the forward vanes has gun barrels detailed on them which I've built with LEGO. I could have used another pair of the back vanes but I only have 3 pairs of each and have built 3 of these BARCs (though one is a customised Jedi BARC which I'll photograph later). Doesn't matter too much though and it's better with the detail than without IMO :wink:

Share this post


Link to post
Share on other sites

Very nice work as usual pedro :thumbup: Probably the best and most accurate with size and detain BARC I've ever seen. Would you mind if I were borrow and or possibly tinker around with the design? If I were to post it with anything, I would be sure to give full credit.

-'Skintasee

Share this post


Link to post
Share on other sites
Would you mind if I were borrow and or possibly tinker around with the design? If I were to post it with anything, I would be sure to give full credit.

Very kind comments 'Skintas, I'm glad you like my design. Feel free to borrow and tinker away!

Share this post


Link to post
Share on other sites

This looks great, i find myself wanting a bit more color, but besides that, it's designed nicely. I like the improvements to the front nose area, where the poles are, not sure what it's called.

:thumbup:

Share this post


Link to post
Share on other sites
This looks great, i find myself wanting a bit more color...

Cheers! The parts swap out easily for coloured variations. I did have an alternate BARC with more dark red, but went for this more version as the colour is more sparse on the 'real thing'. I've also built a custom Jedi BARC speeder with a lot more colour - I'll be photographing that soon.

Share this post


Link to post
Share on other sites
Cheers! The parts swap out easily for coloured variations. I did have an alternate BARC with more dark red, but went for this more version as the colour is more sparse on the 'real thing'. I've also built a custom Jedi BARC speeder with a lot more colour - I'll be photographing that soon.

Great, I can't wait. All Jedi need speeder bikes!

Share this post


Link to post
Share on other sites

Lovely Pedro!!! :wub:

I love the colour sheme and the printed pieces from the 7261 set look very good with the colours. :thumbup:

Can't wait to see the Jedi BARC! :cry_happy:

Well done!

CommanderFox

Edited by CommanderFox

Share this post


Link to post
Share on other sites

Sweet Pedro! Excellent MOC, those small vehicles are not easy to make in Lego and adding some detail is pretty hard. You did well!

Share this post


Link to post
Share on other sites
...those small vehicles are not easy to make in Lego and adding some detail is pretty hard.

Aye! It's quite a challenge recreating detail on such a small scale, it teaches you to combine elements in different ways. I found the shape changing quite dramatically as I tinkered away. I actually started out trying to build a version of the Flitknot speeder, then somehwere along the way thought 'hang on, this'd be better suited to a BARC' and so adapted. It's really rewarding when you arrive at something your happy at :sweet:

Many thanks for the further comments guys!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.