Jump to content


Decal Wish List


2562 replies to this topic

#2176 Bricky0

Bricky0

    Posts: 34
    Joined: 28-August 11
    Member: 20095

Posted 08 September 2012 - 06:16 PM

View PostBobsy, on 08 September 2012 - 12:43 PM, said:

My request. A basic face template with the standard eye/mouth proportions of minifigs on current release (e.g. Collectable Minifigs, Superheroes etc.) in the dimensions used by LDD for its face decorations. That is to say, as wide and tall an image as the images that LDD uses. And by preference, with a transparent background.

The reason for this is that LDD2PovRay has a facility to replace one decoration with another while rendering, but I've not had much success with the ones I've pinched from this board.
I have no idea what you meant by that.
flickr                      Posted ImagePosted Image

#2177 CM4S

CM4S

    Posts: 2599
    Joined: 18-December 11
    Member: 23274
    Country: Minnesota, USA

Posted 08 September 2012 - 07:05 PM

Wondering if someone can do a face decal of this guy...

WARNING: Not for the faint hearted.

Spoiler

I don't want it as creepy as that, just using the normal LEGO style face.

Thanks! When you're done creating it, please put it in a spoiler tag. :|

-Sci

Posted Image Posted Image Posted Image   Posted Image


#2178 Courleciel

Courleciel

    Posts: 268
    Joined: 14-January 07
    Member: 1256
    Country: France

Posted 09 September 2012 - 10:38 AM

I'm looking for a torso decal of the Red Baron.
I precise that I would like it in Dark Gray, not in Dark Bluish Gray.

Posted Image

Thanks !

Edited by Courleciel, 09 September 2012 - 10:39 AM.


#2179 Emperor Krulos

Emperor Krulos

    Posts: 117
    Joined: 13-April 12
    Member: 27953

Posted 09 September 2012 - 05:58 PM

View PostBobsy, on 08 September 2012 - 12:43 PM, said:

My request. A basic face template with the standard eye/mouth proportions of minifigs on current release (e.g. Collectable Minifigs, Superheroes etc.) in the dimensions used by LDD for its face decorations. That is to say, as wide and tall an image as the images that LDD uses. And by preference, with a transparent background.

The reason for this is that LDD2PovRay has a facility to replace one decoration with another while rendering, but I've not had much success with the ones I've pinched from this board.

If this isn't the right dimensions could you supply them?

Posted Image
female face for ldd2pov

Minifig Repository Discussion thread
Direct link to GitHub.



You will go after the Dino-Rider, who humiliated you. Your motivations will be: Hate, fear and envy. I want you to hate your enemy; I want you to fear my wrath, more than anything you fear he may do to you; And I want you to envy victory, so much that you will tear it from his grasp .

#2180 Tim13

Tim13

    Posts: 39
    Joined: 13-February 11
    Member: 15984

Posted 09 September 2012 - 09:49 PM

View PostLego lover, on 05 September 2012 - 12:45 PM, said:

Here are Bricky0's Decals.
Posted Image
Tim Drake Torso


Posted Image

Tim Drake Face
Posted Image
Damian Wayne Torso
Posted Image

Damian Wayne Face

There are the decals I did by now, I'm going to do the others you asked for. Hope you like them. I'm really proud of Tim Drake's torso, it looks likes very lego-ish.


You don't find those inaccurate? Red Robin's emblem is more like a center piece than a shield o the torso.

And Damian Has a different R than that.

Edited by Tim13, 09 September 2012 - 09:51 PM.


#2181 Tim13

Tim13

    Posts: 39
    Joined: 13-February 11
    Member: 15984

Posted 09 September 2012 - 10:22 PM

View PostScorpiox, on 28 August 2012 - 09:47 PM, said:

Very weird request I know, but could someone please do me a couple of decals, with no rush at all.  :classic:

Please may I have face and body decals for Ziggy Stardust, as he appears here:
Posted Image
Face, eyes open please.

Posted Image
Torso and legs, please.



Thanks a lot, guys.  :sweet:

This is my interpretation of the face.

http://i1268.photobu.../ShaneFR3/Z.png

Edited by LuxorV, 11 September 2012 - 07:47 AM.
Changed bigger image deeplink and converted to link. Please use thumbnails. Thanks.


#2182 Bricky0

Bricky0

    Posts: 34
    Joined: 28-August 11
    Member: 20095

Posted 09 September 2012 - 11:36 PM

View PostTim13, on 09 September 2012 - 09:49 PM, said:

You don't find those inaccurate? Red Robin's emblem is more like a center piece than a shield o the torso.

And Damian Has a different R than that.
Yes, the torsos are extremely inaccurate. I am sorry but they are. as I said, I will be using the faces.
flickr                      Posted ImagePosted Image

#2183 Tim13

Tim13

    Posts: 39
    Joined: 13-February 11
    Member: 15984

Posted 10 September 2012 - 12:20 AM

View PostBricky0, on 09 September 2012 - 11:36 PM, said:

Yes, the torsos are extremely inaccurate. I am sorry but they are. as I said, I will be using the faces.

You know I'm not the guy who made them. I'm Tim the Builder Bryant.

#2184 Bricky0

Bricky0

    Posts: 34
    Joined: 28-August 11
    Member: 20095

Posted 10 September 2012 - 09:36 PM

View PostTim13, on 10 September 2012 - 12:20 AM, said:

You know I'm not the guy who made them. I'm Tim the Builder Bryant.
Yes, I figured that out. I only asked because I needed faces.
flickr                      Posted ImagePosted Image

#2185 Super Fish Oil

Super Fish Oil

    Posts: 1152
    Joined: 08-August 11
    Member: 19588
    Country: USA

Posted 10 September 2012 - 11:52 PM

I can't tell entirely what is going on, but I do have decals for my Damian Wayne Robin (he can be seen somewhere in the link provided in my sig) if you're interested. :classic:

Oh, and I also have a Red Robin costume too, but not that design. :sceptic:

Edited by Superficial Username, 10 September 2012 - 11:54 PM.

"The person who says it cannot be done should not interrupt the person who is doing it." –Chinese Proverb


Posted Image


#2186 Tim13

Tim13

    Posts: 39
    Joined: 13-February 11
    Member: 15984

Posted 11 September 2012 - 12:32 AM

View PostSuperficial Username, on 10 September 2012 - 11:52 PM, said:

I can't tell entirely what is going on, but I do have decals for my Damian Wayne Robin (he can be seen somewhere in the link provided in my sig) if you're interested. :classic:

Oh, and I also have a Red Robin costume too, but not that design. :sceptic:
I think he's good. I made him some perfect decals for them already.

#2187 Aanchir

Aanchir

  • Color Encyclopedia


    Posts: 6890
    Joined: 31-December 09
    Member: 8841
    Country: United States

Posted 14 September 2012 - 08:52 PM

I would love to see a custom decal of Nya's party dress from the Ninjago: Masters of Spinjitzu TV show:

It's basically this torso but with the sash from this torso around the waist on both the front and the back. If anyone could do this it would be much appreciated.

I will be back later to edit this post with some screengrabs from the episodes it appears in.

Posted Image recommends the following sites:
Posted Image Posted Image Posted Image


#2188 kartracer21

kartracer21

    Posts: 34
    Joined: 11-March 12
    Member: 27261

Posted 14 September 2012 - 10:30 PM

Hi I was wondering if I could get tthe series 8 minifigure decal for the football player except 21 instead of 15. Thanks!
"May the odds be ever in your favor"

#2189 Miles

Miles

    Posts: 98
    Joined: 06-June 12
    Member: 29029
    Country: USA

Posted 15 September 2012 - 08:33 PM

I think I'll have to go the custom route for this, because I can't find any existing heads that I like.

I'm wondering if someone could make a face decal for Egon Spengler from the cartoon, "The Real Ghostbusters"? Reference at the following link: http://rubberslug.s3...kuzsyhlnb_m.jpg

The Diamond Select Minimate version wasn't too bad, that is probably a good resource as well. Link: http://ectocontainme..._Minimates.html

There's some incredible work on here - you guys are awesome!

#2190 NickAb

NickAb

    Posts: 160
    Joined: 17-December 10
    Member: 14739
    Country: Russia

Posted 17 September 2012 - 01:35 PM

View PostMiles, on 15 September 2012 - 08:33 PM, said:

I think I'll have to go the custom route for this, because I can't find any existing heads that I like.
I'm wondering if someone could make a face decal for Egon Spengler from the cartoon, "The Real Ghostbusters"?
* snip *
Left version is TLG styled, had no place to place glasses under eyes. The right version got some proportions and placement slightly adjusted to fit glasses under eyes, but it still fits with TLG faces.

Posted Image

Download the latest version of SVG decals library and collaborate on making SVG decals library bigger and better on github.
Subscribe to my youtube channel where I post videos on how to create custom decals and other LEGO related stuff. My flickr and Brcikshelf pages.


#2191 thewatchman

thewatchman

    Posts: 107
    Joined: 14-January 11
    Member: 15410

Posted 17 September 2012 - 05:06 PM

At the risk of sounding silly here, does anyone here print the decals to the torsos and sell them online?
Iv looked on bricklink and cannot find any of these items as such but i would love to buy replicas of the comicon only minifigs.

#2192 Miles

Miles

    Posts: 98
    Joined: 06-June 12
    Member: 29029
    Country: USA

Posted 17 September 2012 - 06:41 PM

View PostNickAb, on 17 September 2012 - 01:35 PM, said:

Left version is TLG styled, had no place to place glasses under eyes. The right version got some proportions and placement slightly adjusted to fit glasses under eyes, but it still fits with TLG faces.

Posted Image

NickAb, you're awesome! Thank you! Do you mind if I ask what program you used to make them?

#2193 Nick Gemini

Nick Gemini

    Posts: 17
    Joined: 03-June 12
    Member: 28979

Posted 18 September 2012 - 02:30 AM

Hi. could somebody make the following Decals for me please


Here Are Requests & Refernce pictures


Mokap (Mortal Kombat)
http://images3.wikia...da-render53.jpg

Hitomi (Dead Or Alive)
http://images2.wikia...itomiDOAUC3.jpg

Stryker (Mortal Kombat 3)
http://images1.wikia...rykerversus.png

Nina (Tekken)
http://fc05.devianta...h85-d53cuj2.jpg

Edited by Nick Gemini, 18 September 2012 - 01:45 PM.


#2194 NickAb

NickAb

    Posts: 160
    Joined: 17-December 10
    Member: 14739
    Country: Russia

Posted 18 September 2012 - 05:19 AM

View PostMiles, on 17 September 2012 - 06:41 PM, said:

NickAb, you're awesome! Thank you! Do you mind if I ask what program you used to make them?

Thanks.
I used Adobe Illustrator, but it also can be done in same way in Inkscape which is free.
If you are interested there are some tutorials in Wiki section of http://jpgerdeman.gi...fig-svg-decals/

Download the latest version of SVG decals library and collaborate on making SVG decals library bigger and better on github.
Subscribe to my youtube channel where I post videos on how to create custom decals and other LEGO related stuff. My flickr and Brcikshelf pages.


#2195 Nick Gemini

Nick Gemini

    Posts: 17
    Joined: 03-June 12
    Member: 28979

Posted 18 September 2012 - 01:52 PM

Hey NickAB Could you try thoese Decals i requested please?

#2196 LuxorV

LuxorV

  • Will Cat Accordingly.


    Posts: 6238
    Joined: 11-July 07
    Member: 1771
    Country: Italy

Posted 18 September 2012 - 02:58 PM

View PostNick Gemini, on 18 September 2012 - 01:52 PM, said:

Hey NickAB Could you try thoese Decals i requested please?
You asked for them just a few hours ago; please do not put pressure on our decal designers, as they work as volunteers in their free time. Thank you.

New Member? Read This | Questions? Need Help? Ask Here

Site Guidelines | Eurobricks FAQ | Visual User Guide


Looking for new decals or help customising your LEGO elements? Check the Minifig Customisation Index!

My Brickshelf --- My Flickr


#2197 Nick Gemini

Nick Gemini

    Posts: 17
    Joined: 03-June 12
    Member: 28979

Posted 18 September 2012 - 03:33 PM

View PostLuxorV, on 18 September 2012 - 02:58 PM, said:

You asked for them just a few hours ago; please do not put pressure on our decal designers, as they work as volunteers in their free time. Thank you.
Ok.Sorry About that.I'll refrain from doing that in the future.

#2198 Miles

Miles

    Posts: 98
    Joined: 06-June 12
    Member: 29029
    Country: USA

Posted 18 September 2012 - 06:29 PM

Thanks for the information, NickAB.  :thumbup:

The Wiki website you linked looks very interesting - I can tell I'm going to spend a fair amount of time reading.  :sweet:

#2199 Hersbrucker

Hersbrucker

  • WIP it good


    Posts: 447
    Joined: 18-November 11
    Member: 22070
    Country: Germany

Posted 20 September 2012 - 04:00 AM

Help,

I don't have time right away to do it by myself.
I need this body  :wub: and maybe someone can make the head also  :grin:

Posted Image

Thank you soooooo much!!!

Posted Image

“Strive for perfection in everything you do. Take the best that exists and make it better. When it does not exist, design it.” Henry Royce †


My BL Shop______My MOCpages

#2200 Scorpiox

Scorpiox

  • All Systems Go!


    Posts: 3826
    Joined: 04-March 11
    Member: 16378
    Country: Great Britain

Posted 20 September 2012 - 04:58 PM

View PostHersbrucker, on 20 September 2012 - 04:00 AM, said:

Help,

I don't have time right away to do it by myself.
I need this body  :wub: and maybe someone can make the head also  :grin:

-snip

Thank you soooooo much!!!

Praiter Yed did the face for me a while ago, and I'm sure that he wouldn't mind me reposting it.

Posted Image

Make sure to thank him.  :classic:

I can't help you with the body however, sorry.

Haldor Skovgaard in Sandy's Heroica RPG.
[STATS] and [PROFILE]




Reply to this topic



  


2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users