57 replies to this topic

[Tore M]

Technic Linear Actuator Mini:




Download LXF file

[Giovanne]

Brick 967, Plate 4x8 with Helicopter Rotor Holder:

Introduced - 1970
Discontinued - 1976

Image

LXF File

Brick 968, Trailer Base 4x14x1:

Introduced - 1970
Discontinued - 1976



LXF File

Brick 3137c01, Brick 2x2 with Wheels (Complete Assembly Shortcut):

Introduced - 1969
Discontinued - 1999



LXF File

Brick 4228, Slope Brick 33 5x6x2 Inverted:

Introduced - 1981
Discontinued - 1990



LXF File

Edited by Calabar, 22 December 2011 - 08:05 PM.
Oversized image converted in text link

[hrontos]

Compressed shock absorbers (various types):

ShockAbsorbers.lxf

Retracted linear actuators:

LAs.lxf

Edited by hrontos, 05 August 2011 - 12:27 PM.

[Toa_Of_Justice]

2605c01 - Brick 1 x 2 x 2 & 1/3 Shock Absorber (Complete)

Original element:



My custom version (multiple heights, all in one file):



LXF File

-Toa Of Justice

[OrbitSoldier]

47154-Electric Technic Motor 9V Geared (480 RPM)

 47154_motor.png   37.45K   0 downloads
 47154_motor.lxf   12.19K   7 downloads

46217-Technic Gearbox 4 x 3 x 1 2/3 (90 degree)

 46217_gearbox.png   21.92K   0 downloads
 46217_gearbox.lxf   9.22K   3 downloads

[bbqqq]

x939 Black Technic Tread Very Small.

band by Nachapon S., on Flickr
Grease band.
lxf tread only
LXF Vehicle by Aanchir & ADHO15.with Tread

LDDScreenShot22 by Nachapon S., on Flickr

Edited by bbqqq, 06 January 2012 - 04:56 PM.

[Calabar]

bbqqq, on 04 January 2012 - 03:37 PM, said:

Grease band. Vehicle by Aanchir & ADHO15.

Not sure... which is the custom brick?  

[bbqqq]

Calabar, on 05 January 2012 - 12:17 AM, said:

Not sure... which is the custom brick?  

x1957px1 Black Cloth Sail 17 x 28 Bowed Outward

Sail, didn't fine tune yet.
Black Pearl built by swils.

lxf


LDDScreenShot24 by Nachapon S., on Flickr

Edited by bbqqq, 06 January 2012 - 12:31 AM.

[Calabar]

Wow, the work with the sails is really great!
I hope it will be widely adopted, there are many ship models without sails that appears as naked!  

PS: I sent you a private message.

[Superkalle]

bbqqq, on 05 January 2012 - 06:30 AM, said:

Sail, didn't fine tune yet.
Black Pearl built by swils.

lxf

S.[/url], on Flickr

I agree with Calabar - fantastic job!

[bbqqq]

Superkalle, on 05 January 2012 - 10:54 PM, said:

I agree with Calabar - fantastic job!

Thanks, Calabar & Superkalle.

x1957px1 White Cloth Sail 17 x 28 Bowed Outward with Red Stripes Pattern
This one was better tuned and correct size. I will try to make Triangular sail later.
lxf 2 sails only (8° and 6° tiles angle)
lxf Brickbeard's Bounty - by prateek (with sail)rev.1

sail by Nachapon S., on Flickr

LDDScreenShot30 by Nachapon S., on Flickr

LDDScreenShot31 by Nachapon S., on Flickr

Edited by bbqqq, 06 January 2012 - 06:06 AM.

[bbqqq]

x1957px1 Cloth Sail 17 x 28 Bowed Outward

Thin version sail. Made of glass for frame 1x2x2.

lxf Thin sail only.
lxf Queen Anne's Revenge - by ADHO15 (with thin sails)


sail2 by Nachapon S., on Flickr

LDDScreenShot38 by Nachapon S., on Flickr

Edited by bbqqq, 06 January 2012 - 05:18 PM.

[DLuders]

Good Job Matey

[bbqqq]

DLuders, on 07 January 2012 - 12:57 AM, said:

good_job_matey_pirate_parrot_sticker

x1958px1 White Cloth Sail 18 x 20 Triangular with Red Stripes Pattern
lxf Triangular Sail only.
lxf Brickbeard's Bounty - by prateek (with 5 sails).

sail3 by Nachapon S., on Flickr

LDDScreenShot42 by Nachapon S., on Flickr

Edited by bbqqq, 07 January 2012 - 07:13 PM.

[AndyC]

After a bit of scaffolding, I bring you a handy replacement for the oft used 4x5 panel.


LXF File

[zinfinion]

2552 Raised Baseplate 32x32 with Ramp and Pit - Updated and Corrected - LXF File

A number of changes were made to Solidbrick's brickbuilt version to make it more geometrically accurate:
- The ramp was widened and the vertical walls alongside the ramp were removed and replaced with proper sloped walls.
- Stud and flat placement was corrected at the top and bottom of the ramp as well as in the pit.
- The pit wall angle now correctly matches the exterior wall angle, and the convex corner in the pit was restored.
- Concave corners were left empty, rather than filled. The size of the corners in the pit was reduced from 2x2 to 1x1.
- Longer and larger plates and tiles were used for a reduced part count and cleaner look with less seams. The interior was also hollowed out.
- The part count was reduced from 562 to 327, a 42% decrease.
- Images from Peeron were used to make the corrections.



A quick comparison of the new version on the left to the old version on the right should make most of the corrections obvious:

Edited by zinfinion, 05 February 2012 - 12:07 AM.

[Toa_Of_Justice]

In response to this post in the Most Wanted Bricks thread, I made 30184, Vehicle, Trailer Base 6 x 26 x 2 2/3.



LXF File

I hope this part works well for everyone. If not, please let me know and I'll see if I can fix it.

-Toa Of Justice

[Banjo]

ILikePi, on 23 June 2010 - 07:24 PM, said:

Please note that I had to use the BrickLink catalog for this custom "brick" because Peeron only lists the tauntaun as separate pieces, and not as a complete assembly.

Tauntaun, Complete Assembly (64800pb01c01) from LEGO Star Wars 7749 Echo Base:


LXF file
It comes in both white and light bley because the prototype was in white, and the real version is in light bley. It doesn't come with a place to hold the reins, but comes with two "teeth" instead. Saddles can fit onto them just fine.

I take no credit at all for the design; it was created by LEGO designers as seen in LEGO Star Wars: The Visual Dictionary.

(I have no idea at all how to add custom backgrounds, so I used the "building guide mode" to get a blue one. )

Love the look of this assembly... but is the link broken for everyone else, too? :(

Edited by Calabar, 19 October 2012 - 11:05 PM.
Quoted images deleted

[Costy]

47306 - Technic Beam 5 with Two Ball Joints and Seven Tooth Half Gear

Image from peeron.

LXF
All ball joints and technic beam holes work, but the gear is missing.

[ADHO15]

Great job on those tracks and sails, bbqqq. I didn't see that you'd added them to my models. I'll be sure to include them when I update those sets.

Thought I'd upload a few more custom creatures that I built when updating my Star Wars sets...

Here are both versions of Jabba the Hutt...


LXF File - Old Jabba (sw071)
LXF File - Old Jabba Parts (44361c01 + x208 + 40379)
LXF File - New Jabba (sw402)
LXF File - New Jabba Parts (98109pb01 + 98113pb01 + 98113 + 98111pb01 + 43093)


And a tautaun (64800pb01c01)


LXF File
LXF File - Separate parts (64800pb01 + 86056 + 86055 + 86057 + 86058 + 86059)

[Jason C. Hand]

ADHO15, on 17 October 2012 - 04:16 PM, said:

Great job on those tracks and sails, bbqqq. I didn't see that you'd added them to my models. I'll be sure to include them when I update those sets.

Thought I'd upload a few more custom creatures that I built when updating my Star Wars sets...

Here are both versions of Jabba the Hutt...

LXF File - Old Jabba (sw071)
LXF File - Old Jabba Parts (44361c01 + x208 + 40379)
LXF File - New Jabba (sw402)
LXF File - New Jabba Parts (98109pb01 + 98113pb01 + 98113 + 98111pb01 + 43093)


And a tautaun (64800pb01c01)

LXF File
LXF File - Separate parts (64800pb01 + 86056 + 86055 + 86057 + 86058 + 86059)

Your Jabba looks very good, ADHO15! I got a version up too, but mine is rather bulky. Please feel free to check it out (if you haven't already)

Edited by Calabar, 19 October 2012 - 11:05 PM.
Quoted images deleted

[ADHO15]

Jason C. Hand, on 19 October 2012 - 06:37 PM, said:

Your Jabba looks very good, ADHO15! I got a version up too, but mine is rather bulky. Please feel free to check it out (if you haven't already)

Thanks.
Yeah, I saw it. Nice job. Mine should be closer to scale and more functionally similar, I think.

[legolijntje]

I updated the index in the first post, because it was... well... very outdated (from 2010)

[Jason C. Hand]

ADHO15, on 20 October 2012 - 02:09 PM, said:

Thanks.
Yeah, I saw it. Nice job. Mine should be closer to scale and more functionally similar, I think.

Yeah, it will, man. Thanks again for sharing it

[Toa_Of_Justice]

As requested in this post...

40245c00 - Animal 3-headed Dog Complete Assembly

Original (thumbnail borrowed from Peeron and resized by me)



My custom version (based off my rendering of the wolf in set 7015)



LXF File

As in my rendering of the wolf, the ears are not actually attached, but everything is grouped together so Fluffy can be picked up and moved around as one unit. In addition, my custom part seems to be much more poseable than the original part, but the jaws don't open and close.

-Toa Of Justice