915 replies to this topic

[C3POwen]

5970 Freeze Ray Frenzy [Space Police 3, 2009]



MPD file

Errors:
- Missing 1x 85948pb01 Minifig, Head Modified Kranxx with Black Eyes and Open Mouth
- Missing 1x 85959px1 Wave Rounded Large (Flame) with Marbled Trans-Yellow Pattern [Replaced with 32558 Bionicle Weapon Toa Flame Sword]
- Missing stickers / correct printing

legolijntje, on 10 May 2012 - 08:47 PM, said:

Well, I really don't know how to use LSynth; even with the tutorial I can't use it (but it works; it's just me) and that's slowing everything a bit down

I wouldn't worry too much about the LSynth stuff. It's nice if you can get it to work, but don't let it hinder you from making and posting models.

EDIT: Updated "Errors".
EDIT 2: New render.

Edited by C3POwen, 09 June 2012 - 07:29 PM.

[C3POwen]

5972 Container Heist [Space Police 3, 2009]



MPD file (not all submodels shown, but included in file)

The side containers and the arm that holds the cannon can be pivoted properly within MLCad, so that it can be hidden from view (although the attached chain is static). The cannon and the arm that holds it also have their own pivot points within one of the submodels.

Errors:
- Missing 1x 85942 Minifig, Headgear Helmet Spiked Top with Grille and Open Front and Back
- Missing 2x 85959px1 Wave Rounded Large (Flame) with Marbled Trans-Yellow Pattern [Replaced with 32558 Bionicle Weapon Toa Flame Sword]
- Missing 4x 61800 Bionicle Wing Small
- Missing stickers / correct printing

[C3POwen]

5973 Hyperspeed Pursuit [Space Police 3, 2009]

Space Police VX-Falcon


Skull Interceptor


MPD file (not all submodels shown, but included in file)

The Space Police VX-Falcon features flexible LSynth-generated hoses, which will only render in MLCad and LDView if LSynth has been installed.

Errors:
- Missing 2x 57029c01 Technic Competition Cannon, Flat Bottom [replaced with 32074c01 Technic Competition Cannon, Round Bottom]
- Missing 2x 85959px1 Wave Rounded Large (Flame) with Marbled Trans-Yellow Pattern [replaced with 32558 Bionicle Weapon Toa Flame Sword]
- Missing 4x 61800 Bionicle Wing Small
- Missing stickers / correct printing

[legolijntje]

C3POwen, on 12 May 2012 - 05:39 PM, said:

The Space Police VX-Falcon features flexible LSynth-generated hoses, which will only render in MLCad and LDView if LSynth has been installed.

That's one of the reasons why I want to use LSynth in my UCS models; you can view them in LDview and render them in POV-ray, that's what sr3d builder hoses can't (and LSynth looks better). I think I understand LSynth now, but now MLcad is the problem; I haven't worked with it for such a long time now, it's like it's all new to me  

So, while trying to understand MLcad again, I'm working on (yes, still and UCS   ) sculpture of Darth Maul...
and a weird Spongebob set (really)  


EDIT: I just see the text "temporary render", that really doesn't look tempory, what do you want to improve?

Edited by legolijntje, 12 May 2012 - 07:38 PM.

[C3POwen]

legolijntje, on 12 May 2012 - 07:37 PM, said:

I think I understand LSynth now, but now MLcad is the problem; I haven't worked with it for such a long time now, it's like it's all new to me

I have to admit that when I went back to MLCad from LDD, it took me a while to get used to it again.

legolijntje, on 12 May 2012 - 07:37 PM, said:

EDIT: I just see the text "temporary render", that really doesn't look tempory, what do you want to improve?

The lighting doesn't look very good, but to improve it would require some very long render times, and at the moment I mainly want to get things posted.

Also, the neon green is way too bright, and needs toning down a bit. It looks almost radioactive!

[C3POwen]

A quick break from the Space Police. I'm guessing this one hadn't been attempted due to the flexible rubber hoses.

21003 Seattle Space Needle [Architecture, 2009]



MPD file

To see the rubber hoses in MLCad or LDView requires LSynth to be installed.

Errors:
- No printing

EDIT: Printed tile now available for LDraw.

Edited by C3POwen, 15 June 2012 - 05:10 PM.

[legolijntje]

C3POwen, on 13 May 2012 - 12:34 PM, said:

A quick break from the Space Police. I'm guessing this one hadn't been attempted due to the flexible rubber hoses.

Well, I have attempted it a while back, but then I realised it had hoses, so I stopped with it (back then I didn't wanted to use LSsynth).

So, for those who don't want which model to make; the only already/almost released architecture models we still don't have are:
-21012 Sydney Opera House
-21010 Robie House (but please don't start make this one, I have an almost complete one, I'll finifh it soon)
-21013 Big Ben (but this one is not released yet)

[whitew0lf]

legolijntje, on 13 May 2012 - 01:47 PM, said:

Well, I have attempted it a while back, but then I realised it had hoses, so I stopped with it (back then I didn't wanted to use LSsynth).

So, for those who don't want which model to make; the only already/almost released architecture models we still don't have are:
-21012 Sydney Opera House
-21010 Robie House (but please don't start make this one, I have an almost complete one, I'll finifh it soon)
-21013 Big Ben (but this one is not released yet)

Ok, here is the Sydney Opera House


Ldr

Edited by whitew0lf, 24 May 2012 - 02:49 PM.

[EdmanZA]

10019 - Tantive IV / Rebel Blockade Runner



SR3D File

Complete, except for the stickers..

Edited by EdmanZA, 26 August 2012 - 02:43 PM.

[C3POwen]

Another quick one I threw together, with shades of Scooby Doo...

Mystery Van [LEGO Club]



LDR file

Instructions from http://club.lego.com...ldingSteps.aspx

[C3POwen]

The largest of all the Space Police III sets, this one took a while to complete. It's also a duplicate of a previously posted model, but has more accurate parts (although as of posting, I still need to add the minifigs).

5974 Galactic Enforcer [Space Police III, 2009]



MPD file (not all submodels shown, but included in file)

All rotatable parts should move correctly within MLCad, as they are set up with correct pivot parts, including the ball-jointed cannons on the wings. The hoses at the front require LSynth to be installed.

IMPORTANT NOTE: This model contains one unofficial part (32008 Technic, Figure Accessory Scuba Flipper) which is included as a submodel within the MPD file, so there is no need to install it.

Errors:
- Missing 1x 3039pb45 Slope 45 2 x 2 with Aircraft Multiple Flight Controls Pattern [replaced with 3039pc5 Slope 45 2 x 2 with Flight Control Pattern]
- Missing 8x 61800 Bionicle Wing Small
- Missing 1x 85944 Minifig, Headgear Helmet Spiked with Flat Chin Protector
- Missing 1x 85948pb01 Minifig, Head Modified Kranxx with Black Eyes and Open Mouth
- Missing 1x 85959px1 Wave Rounded Large (Flame) with Marbled Trans-Yellow Pattern [replaced with 6126 Wave Rounded with Base Pins]
- Missing stickers / correct printing

EDIT: Unofficial part now included in MPD file.

Edited by C3POwen, 15 July 2012 - 07:19 PM.

[C3POwen]

5979 Max Security Transport [Space Police III, 2009]



MPD file (not all submodels shown, but included in file)

The cockpit and engines can be combined to form a smaller fighter (see below), and all rotatable parts have correct pivot points, meaning the wheels can fold down and the side cannons can be raised.

Errors:
- Missing 1x 3039pb45 Slope 45 2 x 2 with Aircraft Multiple Flight Controls Pattern [replaced with 3039pc5 Slope 45 2 x 2 with Flight Control Pattern]
- Missing 1x 57029c01 Technic Competition Cannon, Flat Bottom [replaced with 32074c01 Technic Competition Cannon, Round Bottom]
- Missing 1x 85942 Minifig, Headgear Helmet Spiked Top with Grille and Open Front and Back
- Missing 1x 85944 Minifig, Headgear Helmet Spiked with Flat Chin Protector
- Missing stickers / correct printing

The mini fighter, made from the cockpit and engines:



EDIT: Corrected set number; added mini fighter image.

Edited by C3POwen, 15 July 2012 - 07:20 PM.

[legolijntje]

EdmanZA, on 14 May 2012 - 09:43 PM, said:

10019 - Tantive IV / Rebel Blockade Runner

SR3D File

Complete, except for the stickers. I added a tourist to give a sense of scale.

Can you please remove the minifig from your file? The minifig isn't in the model.  

[Palathadric]

I'm currently doing a major clean-up on my brickshelf account and getting it re-organized. If the pictures can't be seen or the download links don't work then don't panic, I'll get them up soon.

[C3POwen]

Probably my favourite LEGO model of the ones I own, I have it on display alongside Chewbacca and (slightly customised) Han Solo minifigs.

7778 Midi-scale Millennium Falcon [Star Wars, 2009]



LDR file

Errors:
- Missing stickers

My first render testing out radiosity in POV-Ray. It's okay but not perfect. There seems to be a few visual artefacts, although these don't seem to show too badly in the resized image above.

EDIT: Re-rendered with better radiosity settings.

Edited by C3POwen, 15 June 2012 - 05:07 PM.

[C3POwen]

5982 Smash 'n' Grab [Space Police III, 2010]



MPD file (not all submodels shown, but included in file)

Errors:
- Missing 1x 85947pb02 Minifig Head Modified Alien with Tongue and Yellow Eyes*
- Missing 1x 87781 Minifig Headgear Helmet Space [replaced with 2446 Minifig Headgear Helmet Standard]
- Missing stickers / correct printing

* You may be able to see him sat in the cockpit, but I'm using an unofficial part exported from LDD which is not available from the LDraw site.

Edited by C3POwen, 15 July 2012 - 07:20 PM.

[Palathadric]

All pirate models have updated pictures now. LDR links don't work yet. Will work on uploading them soon. Will also do "one with minifigs" and "one without minifigs" as I've done with the pictures.

[C3POwen]

Palathadric, on 26 May 2012 - 11:08 AM, said:

All pirate models have updated pictures now.

Wow! Your renders have come out looking really good! What lighting settings did you go with? It might be worth posting them in the POV-Ray tutorial thread.

Palathadric, on 26 May 2012 - 11:08 AM, said:

LDR links don't work yet. Will work on uploading them soon. Will also do "one with minifigs" and "one without minifigs" as I've done with the pictures.

I'd probably leave the LDR files as they are, and let people remove the minifigs if they choose to. That's why I like the MPD file format, as it allows me to keep minifigs separate from the main model.

[C3POwen]

6896 Celestial Forager [M:Tron, 1990]



MPD file

The boom at the back of the vehicle can be moved on its pivot, however the container is not directly attached and the magnets will need to be re-orientated individually.

Edited by C3POwen, 15 July 2012 - 07:20 PM.

[Palathadric]

C3POwen, on 26 May 2012 - 12:55 PM, said:

Wow! Your renders have come out looking really good! What lighting settings did you go with? It might be worth posting them in the POV-Ray tutorial thread.
Thank you, C3POwen!

I'd probably leave the LDR files as they are, and let people remove the minifigs if they choose to. That's why I like the MPD file format, as it allows me to keep minifigs separate from the main model.

I already have both files, so I just need to upload and post them. That's one disadvantage of SR 3D Builder. I don't think one can save into MPD format. Ah, well!

[C3POwen]

1969 Mini Robot [Space Police II, 1993]



MPD file

Edited by C3POwen, 15 July 2012 - 07:20 PM.

[legolijntje]

Good work Palathadric and C3Powen  

My UCS Darth Maul and Architecture Robie House are almost complete, but last week it was a bit too warm to build on a computer. The whole week it was about 25 degrees (Celsius), but next week, the temperature will go down to about 12 degrees...

Spoiler

Yes, the weather here is since last the beginning of year really weird. I think it are special forces:    

[Palathadric]

I settled for making my backgrounds, transparent, because I couldn't get the surface to look too great. I still don't like the shadows on the slanted parts of the raised base plates, especially in Eldorado Fortress and Imperial Trading Post. Ah, well! Stupid me, I never did the Islander sets!   I originally didn't do them because there were no minifigs, hats, hair, etc.   I think there's a few now, so let's see. I believe I have them built already without minifigs. Have to check.

[C3POwen]

6861 Super Vehicle [Blacktron II, 1991]



MPD file

[C3POwen]

8362 Ferrari F1 Racer [Ferrari, 2004]



MPD file

Errors:
- Missing correct printing / stickers