42054 - Claas Xerion 5000 Trac VC - Rating  

212 members have voted

  1. 1. How do you rate this set?

    • Outstanding
    • Above average
    • Average
    • Below average
      0
    • Poor
      0


Recommended Posts

15624317003_e8eb01e330.jpg

REVIEW - 42054 - CLAAS XERION 5000 TRAC VC

28109171994_30a4d95d8b_c.jpg

INTRODUCTION

First of all my apologies. Sorry it took so long for this review to be published. Sometimes there are other things in life that need attention. Next year I will try to keep July free for LEGO reviews :wink:

With all the news about the 42056 - Porsche GT3 RS and the 42055 - Bucket Wheel Excavator, you would almost forget there are two other great sets coming up during the second half of 2016. One of which is the 42053 - Volvo EW160E, while the other is the 42054 - Claas Xerion 5000 Trac VC. Today we will be reviewing the latter. Like LEGO it seems that CLAAS also likes its name spelled with capitals, so from now on I will happily oblige.

While I live in an area which is flooded by tractors and farm equipment, the CLAAS doesn't seem to be very popular in Holland, while CLAAS is a brand which originated in Germany, not too far away. I have never been a real fan of LEGO Technic farm equipment models. To be honest; I have skipped all of them. They just didn't look interesting enough. How different the CLAAS is. I'll just throw it out there...this is love af first sight. Sometimes the real model looks even better than in the pictures. If this is the case with the CLAAS, it's definitely one of the best looking models ever made. Usually you don't draw conclusions in the introduction, but I simply felt the need to address the feeling that I have when I look at this model. CLAAS being one of the biggest (if not THE biggest) manufacturers of combine harvesters, we might be treated with another CLAAS model in the future.

So, not having bought a single farm equipment set, combined with my limited knowledge of real farm equipment, I had to invest some time to get acquainted with the CLAAS XERION 5000 TRAC VC. In case you are wondering what VC stands for, it's the designation for Variable Cab, meaning the cab can be rotated backwards, to facilitate driving backwards....or is it forward?!

At CLAAS, VC stands for Variable Cab. The rotating cab is the most convenient reverse-drive system imaginable. At the press of a button, the entire cab moves from its central position to the rear-facing position above the rear axle in seconds.

The controls rotate automatically with the cab, so all functions remain the same when operating in the rear position. For high driving comfort on the road, the cab is centrally positioned between the axles. In the silage clamp, on the field, in the forest or in the mountains, the XERION with the cab rotated over the rear axle becomes a user-friendly self-propelled machine with a unique view of the job in hand.

If you are looking for more information, here's the Brochure and Technical data.

Funny fact about this set is that it's simply addressed as one of the 2H 2016 sets, while with almost 2000 parts, it would definitely have qualified as a flagship a couple of years ago. This is a clear indication that the Technic product line has been evolving rapidly. I start to wonder how big this model actually is. Let's open the box and find out.

SET INFORMATION

Number: 42054

Title: Claas Xerion 5000 Trac VC

Theme: Technic

Released: 2016

Part Count: 1977

Box Weight: 2834 gr

Box Dimensions: 58,0 cm x 37,2 cm x 9,8 cm

Set Price (MSRP): € 159

Price per Part: € 0,080

Links: Brickset, Bricklink

THE BOX

Having the Porsche and BWE around almost makes you forget that this isn't the Prima Donna of 2016. The box doesn't help either, since it's quite a big lady. A few years ago it could have easily passed as a flagship set. As usual, the front shows a nice picture of the model. The right side indicates that this is a PF powered set, where the M-motor and PF Battery Box are included. Bottom right tells us the crane arm and cabin are motorized. At this point it's not exactly clear what the motorization entails, but I bet the backside of the box will show us more details.

28185348051_beb04bf0b8_c.jpg

BACK

The back of the box (click to enlarge) shows us that the boom of the crane can be raised and lowered using Power Functions, as well as rotating the crane. Also, the cabin can be rotated using Power Functions, which is obviously super cool! I'm really anxious to find out how this works.

The lower left corner shows us the three steering modes of the CLAAS XERION. Yes, you heard it right, three steering modes! Just like the Porsche should have had :wink: The lower right corner shows a picture of the B-model, which is actually the same tractor, with a different attachment. The crane has been transformed into a silage plow. As you can see, the cabin (and thus controls) are facing a different direction than in the picture of the A-model. Like the Unimog I expect lots of modifications and attachments for this model!

27982448770_36cb6305a6_c.jpg

CONTENTS OF THE BOX

The box contains the following items:

  • 1x Sealed instruction manual and sticker sheet
  • 11x Bags for step 1
  • 4x Bags for step 2
  • 1x Unsealed PF battery box
  • 1x Sealed PF M motor
  • 4x Red rims
  • 4x Awesome new tires

This is how it looks when you throw everything on one big pile.

28185348371_5360468e22_c.jpg

INSTRUCTION MANUAL AND STICKERS

The instructions are provided in a square bound book, sealed in a bag with the stickers. I really like this way of packing the manual and stickers. Keeps both the book and sticker sheet unharmed.

27982450510_9483c3c215_c.jpg

Below are detailed pictures of the book and sticker sheet. The latter contains lots of little stickers for switches and controls. This means the model will have lots of functions....yay!

27647966584_fe9054c364_n.jpg 27647966794_d8f1cb6f32_n.jpg

PF COMPONENTS

A PF Battery Box and a sealed PF M-motor.

27982454040_6fceff3edd_n.jpg

RIMS AND TIRES

Without a doubt the single most eye-catching elements when opening the box are the new tires!

28185097541_9b9085917d_c.jpg

11 BAGS FOR STEP 1

27982455250_ede4aa5f93_m.jpg 27647968234_71a11a6e40_m.jpg 27982455830_07f54f507d_m.jpg

27647968624_739237f5b4_m.jpg 27982447520_665215a996_m.jpg 27982456710_7a5bfa2b1a_m.jpg

27982457320_14aa6745a8_m.jpg 27982457750_747e2532d6_m.jpg 27982458370_56e9bb8381_m.jpg

27982458970_72c672fdf3_m.jpg 27982459510_d6f576e14b_m.jpg

4 BAGS FOR STEP 2

28159802192_e539324477_m.jpg 28229280626_df77ed820e_m.jpg 27647970164_f5704919f5_m.jpg

27648051223_60c98801d8_m.jpg

HIGHLIGHTED PARTS

Back by popular demand is the Highlighted parts section. For this set it's quite elaborate. Not because it contains loads of new parts, but it does contain quite a few new-ish parts in large numbers. This indicates that the designer used some of the new building techniques in this set. And there's something funny going on with the axles, so let's start with those.

AXLES

Red and Yellow axles have been introduced in most of the 1H 2016 sets. What's striking though, is that this contains axles in both the regular black and grey color, as well as the latest yellow and red versions.

Here you can see that we get both the grey and yellow 5L and 7L axles. I have included only a single grey version to make my point. Actually there are 11 yellow and 5 grey 5L axles and 6 yellow and 15 grey 7L axles.

28488436156_ab7b5bb51d_n.jpg 28236709400_482a681f4a_n.jpg

Same goes for the red 4L and 8L axles, which have a black counterpart (also a single one included in the picture). This set contains 9 red and 4 black 4L axles and 2 red and 2 black 8L axles. Makes sense, right?!

At this point I am really starting to wonder what the strategy behind the axle color distribution is. Is TLG getting rid of their old stock or is there a better explanation? Hopefully we will discover some logic, but I highly doubt it.

27903742054_2018b8c459_n.jpg 28442495861_270719e383_n.jpg

On the left you can see the new (2016) 3L Axle with Stop and on the right you see the 2012 4L Axle with Center Stop. Inclusion of the latter is not so special, if it weren't for the quantity. A total of 12 are included, which is more than in any other set.

28442496711_aaf50b9a66_n.jpg 27903742254_a77b55a260_n.jpg

And even a single 11L axle in yellow, which completes the uneven yellow axle family (3L, 5L, 7L, 9L and 11L). Fun fact; the 3L axle in yellow has been introduced in 2015 (in the LEGO Ideas Wall-e set) and has been used in quite a few 2016 sets, but not in any of the Technic sets. Same goes for the 9L axle, which has been used in three non-Technic sets. Adds another layer to the axle mystery.

28442496471_d2e1b2e7ce_n.jpg

Let's talk Pins and Pin Connectors.

3L PIN WITH 1L/2L AXLE

This set includes 20 3L Pin with 2L Axle from 2015 and a whopping 31 3L Pin with 1L Axle from 2014.

28520306835_0c20c2cdf2_n.jpg 28442496251_2018b8c459_n.jpg

AXLE/PIN WITH PIN HOLE

If you are in need of Pin with Pin Hole from 2014, look no further. This set contains 49 of 'em. Yes that's right, 49!! And 14 of its axle counterpart Axle with Pin Hole from 2016.

28236709060_4f249fb0ff_n.jpg 28442496051_0312f2f9d2_n.jpg

AXLE AND PIN CONNECTOR HUB WITH 2 AXLES

This set also comes with 12 Axle and Pin Connector Hub with 2 Axles. Already introduced in 2012, but relatively new in black.

28236709200_90e6dd9b65_n.jpg

1L PIN CONNECTOR

Introduced in 2015, received with some surprise from the community. Why do we need this 1L Pin Connector?! Well, there's 54 in this set so we are bound to find out why it's useful.

28488436116_ba5eba8e50_n.jpg

H-FRAME (DOG BONE)

In my review of the 42023 Construction Crew (one of my two first reviews) I introduced this part. The Liftarm 3 X 5 Perpendicular H-Shape Thick a.k.a. Dog Bone Frame or H-Frame. A compact versatile frame which appeared in quite a few sets but never in such quantities. This set contains 10 of them.

28442496861_82151eec8c_n.jpg

CURVED PANEL

The 3 x 6 x 3 Curved Panel was already available in blue and yellow and now it's also available in black. You only get a single one in this set though.

28442496991_7c63caec45_n.jpg

TURNTABLES

This new turntable was introduced in 2015 and it's the first time it appears twice in a single set. It's comprised of two parts, The Top and The Base.

28236709750_82151eec8c_n.jpg

STEERING WHEEL HUB

Introduced in the Porsche (only because it was available first) and now also available in the CLAAS. Two of them in the Porsche but if you like to build 4W steering this is the set for you. It contains 4 Steering Wheel Hub Holder with 2 Pin Holes and 2 Axle Holes.

27903742624_dd601a54d1_n.jpg

LIME GREEN IS THE NEW YELLOW

A reasonably large selection of lime green parts. Not sure if it's visible in this picture but apparently lime green is the new yellow, when it comes to parts being identically colored. Variation in lime green is significant.

This picture shows a detailed view of the color difference. It's clearly visible near the 2x1 plate. The connectors and liftarm do differ as well.

28661121521_6d25d950c0_c.jpg

Good news is that there are some new parts available in lime green:

28488436296_93ffba868f_c.jpg

DISHES

This 6x6 Inverted Rader Dish isn't new, but it's the first time we see it in red. This picture also shows the reflection of the light bounced off the ceiling.

27904582953_868004fa27_n.jpg

RIMS

The rims are your run of the mill 56mm D. x 34mm Technic Racing Rims, with the unique feature that, like the 6x6 Inverted Dishes, these come in red for the first time.

27647802273_53b84b1fa8_c.jpg

TIRES

Four brand new 107 x 44R Tractor Tires!

28159577892_50d52024a2_c.jpg

PART LIST

Here's the complete list of 1977 parts.

27982453500_056e5a2eda_n.jpg 28282918325_936d1c793c_n.jpg

THE TRACTOR

The build consists of two phases, the tractor and the crane. Obviously we will start with building the tractor. Get your #1 bags, rims, tires and PF components....we are about to begin!

28229274686_fd159f6d9f_c.jpg

We start by building the chassis. The back side of the chassis to be specific. You can already see part of the steering mode selector mechanism taking shape.

28442497171_6f1564decc_c.jpg

REAR MOUNT

The manually operated rear mount which will later be used to attach the crane (or other attachments). Manual operations include raising and lowering the attachment. There's a PTO (Power take-off) which will be connected to the PF motor, so it's not operated manually.

27903742894_c513a311ea_n.jpg

Here you can see the rear mount attached to the chassis.

28442497431_28f92ba557_c.jpg

The bottom view shows the PTO drive shaft.

27903743094_cefdf25f15_c.jpg

STEERING

Since this tractor has 4 wheel steering, the rear axle also needs to be steerable. To accomplish that, the new wheel hubs are used. No rack and pinion yet?! Or no rack and pinion at all?! I was wondering why the blue Axle Pin is used in favor of a Pin without friction. Normally my best guess is that these parts are used in the B-model, which isn't the case for this model. The only possible thing I can imagine is that the friction is needed to prevent wobbling, and the axle end makes sure the steering is smoothly. Best of both worlds kind of thing.

28520306915_e2c49b50fb_c.jpg

The yellow 1/2 bush limits the steering angle. A limited steering angle is something that's bothering me frequently in Technic models. So I tried to remove the bushes and replace the 3L axles with 2L axles. This does improve the steering angle. However, as you can see in the pictures below, there's a reason the steering angle is limited. The left tire is touching the chassis. We will need to work with the default setup. Which actually isn't that bad in the end.

28442497651_76bba484d5_c.jpg

The following picture clearly explains why we need red 4L axles, while there are also black 4L axles in this set. Or does it?

27903743354_8996996ed0_n.jpg

Clearly no rack and pinion steering. Instead there's a cleaver mechanism transforming rotational movement into linear movement and back into rotational movement again. The linkage on the red axles can be moved into three different positions for the three different steering modes.

28442497831_b1e81693a8_c.jpg

Here's a short video demonstrating the mechanism:

A manually operated lever on the back sets the linkage in one of three positions, selecting the steering mode. Stickers are used to indicate the different modes.

28558488545_0fc04cc752_c.jpg

Another short video of the steering mechanism:

The pictures below show the different steering modes, respectively:

  • Crab steering
  • Front wheel steering
  • Four wheel steering

28558532775_7b82d2a7d4_m.jpg 28558532005_5e8dfe0554_m.jpg 28480645961_5b11ca03d2_m.jpg

The video below shows a demonstration of the different steering modes:

The bottom view of the chassis:

28558532585_f43e1afcdb_c.jpg

The video below shows the bottom view of the steering mechanism:

BARMAN

Of course this mechanism is no surprise at all, since our good friend Barman already figured it out ages ago. Obviously a variation of the setup, but the basic are definitely the same. Well done Barman!

PTO

In the picture below you can clearly see that the PTO runs from the front to the back. Even though this model doesn't have a powered front attachment, it's prepared to have one. Kudos to the designer for this feature!

28526235456_5ae4d72a67_c.jpg

GEARBOX

This gearbox is used to power the different functions. As you can see there are two Clutch Gears. One is for the PTO and the other one is for the cab rotation.

28558532125_a24f480e65_c.jpg

Here's how the gearbox will be attached to the chassis. Switching the change over catch results in changing direction of the function. This is confirmed by looking at the left side of the gearbox, the "differential like setup".

27942961553_30f7d52bb6_c.jpg

MOTORIZATION

A Power Functions M-motor is used to power all the functions. Since there's no driving or steering involved, the M-motor is just fine!

28526235056_f78757210c_c.jpg

CHASSIS

Picture below shows the chassis without the battery box, but with both front and rear mounts

28480646121_2a6e420ac7_c.jpg

Here you can see a video of how the battery box switch works. This is a rather ingenious mechanism.

CONTROL PANEL

In the images below you can see why we need 54 1L Connectors. They might not be necessary, but I do like 'em. They are aesthetically pleasing and avoids having gaps in the model. Otherwise bushes would be used, which definitely don't look as good as the 1L Connectors.

28526235296_a2c984f9cd_n.jpg 28558532435_5f2562cffe_n.jpg

Here's a detailed view of the control panel on the side of the vehicle. One switch will turn the battery box on and off, while the other rotates the cabin back and forth.

28558457865_5e3bbb6f68_c.jpg

Here's the control panel attached to the vehicle. This surely is one of the best looking control panels I have seen.

27942961703_fcd3d8d455_c.jpg

HOOD

The lime green hood, combined with the white roof and red rims, is one of the most recognizable sections of the CLAAS. Unlike other hoods this isn't just a couple of panels and done. It's actually quite a big build.

28109173234_f59816c4ac_n.jpg 28694297346_90cfd02868_n.jpg

The front of the hoods actually needs a CLAAS stickers, which I forgot before taking pictures. The hoods can be lifted and held up with a support axle. Usually you will see the fake engine, but now there's a battery box. To be clear; there's no fake engine at all. Which is perfectly fine given the fact that the battery box is well hidden inside the model.

28621262992_9834d34ee0_c.jpg

Closing the hood results in this pretty picture. I am already starting to like the looks of this model. The build also gets more interesting along the way. In the beginning there's much going on without really making sense. Seems like a bit here and a bit there. Some constructions seem rather flimsy. However, the further you progress, the better the builds get, to a point where it's actually a great building experience.

28109172614_3ff3b5359f_c.jpg

CABIN

Here you can see the base of the cabin, which actually has a nice feature. When the cabin rotates a little wheel underneath lifts the cabin a stud or two. This results in the cabin freely rotating around its axle. When it has turned 180 degrees, it falls in place again.

28621264132_78cb09dfc7_c.jpg

Here you can see the up and down mode of the base of the cabin.

28109170454_30b7775eef_n.jpg 28694295656_140d177617_n.jpg

The finished cabin looks stunning!!

28621264322_60cf3db72f_c.jpg

The back of the cabin has some intricate details, like the fire extinguisher and the 50 km/h sign. In the cabin there a computer display showing the field. I think you can even fit a minifig on the chair.

28726745655_748724db0a_c.jpg

Here's a sequence of images demonstrating the rotation of the cabin. You can clearly see the raising and lowering of the cabin when it rotates.

28109172814_2822ec4e9a_n.jpg 28694297086_012cbaa00b_n.jpg

28109173024_bf900525d8_n.jpg 28726745305_62af416289_n.jpg

28694297296_2216955c6e_n.jpg

FINISHED TRACTOR

After finishing the cabin, you end stage 1 and the tractor is finished. I can only come to this conclusion: Yes, it looks great in real life too! And great is an understatement. This is one of the best looking Technic models ever! I wasn't a big fan of lime green, but it just went up a couple of notches on my ladder. Especially in combination with white and red!

28109170314_2a207ce72e_c.jpg

I can't think of a single thing I don't like about the tractor. Even the battery box is nicely hidden inside the model, while it still can be easily switched on and off. Cabin rotation is how it's supposed to be and there's a front and back PTO. Simply amazing!

28694297176_5fefdea6ea_c.jpg

OOPS!

I missed two of the headlights. Thanks to Charlesw for pointing this out :thumbup:

28770228576_86b77978fb_o.jpg

THE CRANE

After the 1st stage, you enter the 2nd stage...building the crane! I have included a picture of the crane on my work desktop, instead of my photography desktop. Looking at the pictures, it appears that I have no OCD when it comes to arranging parts before the build.

On the left side of the crane (where I already applied the stickers) you can see the controls for the crane. Two levers, both with an up and down mode. One of them will rotate the crane, while the other will raise and lower the boom.

28109170654_71286a7b28_c.jpg

For all you photography enthusiasts; these two pictures are taken with f14 instead of f20, resulting in a sharp picture but slightly blurred (out of focus) background. This draws attention to the model, while still being able to figure out what's going on in the background. I used to shoot everything with f20, which would have resulted in an entirely focused picture.

28726743675_39ed625d0f_c.jpg

Three more images of the base of the crane. This time without the unnecessary cluttering with extra parts.

28621264452_0df7fde101_m.jpg 28694295866_7fd48b28d9_m.jpg 28621263232_9a160498e2_m.jpg

FINISHED CRANE

Lo and behold, the crane! First of all, I am not the biggest fan of cranes. Why not? Because they have a tendency not to work properly, especially the Pneumatic ones (apologies to the Pneumatic fanboys). Therefor it's worth to mention that I actually like this one. A decent design with functions that actually work. Admittedly the manual functions are not that great and maybe a bit flimsy, but that will always be the case when building in this scale. Most important are the two motorized functions, which work like a charm. The mechanism to attach the crane to the tractor is nifty too, although it can be a bit of a struggle to attach it to the PTO. This takes some practice.

28694295996_ee0ee03b10_c.jpg

FINISHED MODEL

Meet the CLAAS XERION 5000 TRAC VC! I have said it before and I will say it again; this is one good looking model. The shapes, the design, combined with the CLAAS color scheme makes it really stand out. Admittedly, the crane doesn't improve the looks of the model. Being an attachment, I don't really mind.

28109171744_c7626ef08e_c.jpg

The nose of the CLAAS looks so cool. Especially with the weights on the front attachment and those new tires. I really love this picture.

28649462341_c328a46254_c.jpg

Another think I absolutely love is the cabin of the model. All kinds of small details and the overall look is stunning.

28621266152_780ebbc0e0_c.jpg

The crane is....well.....a crane. It's not ugly, nor is it a beauty. Technically it's working properly, which is the most important thing. It does kind of bend over a bit, but it doesn't bend the chassis. It's caused by the way it's mounted to the rear attachment. Raising the attachment will straighten the crane a bit. The rear attachment is quite solid, which is good thing. The outriggers need to used for extra stability.

28621266212_49f862fe0b_c.jpg

This side view show what I mean by the crane leaning over.

28442618970_5cde12b8eb_c.jpg

The rear view of the entire model. I love the fire extinguisher and the 50 km/h sign!

28694296836_fd60d78684_c.jpg

Another front view of the model.

28621266022_15eb1bd37c_c.jpg

LEFT OVER PARTS

Quite a few 1L Connectors left. Makes you wonder whether I skipped a few. Or they are used in the B-model.

28726747235_615bbf2d60_n.jpg

FEATURES AND FUNCTIONS

So the model looks good. Does it function properly?! And what exactly are the functions?! After the last building step, the manual shows four pages with functions! The first two pages concentrate on operating the crane and cabin, using the PF functions.

28621265262_00f52c179b_n.jpg 28726747015_d8eacdc620_n.jpg

The other two pages focus on the different steering modes.

28621265602_e9063b2b4e_n.jpg 28621263482_ac376a64f8_n.jpg

Let's take a look at the video to see these functions in action:

The front attachment is manually operated and can be raised and lowered. Attaching to the chassis is easy, so it can be easily changed for another attachment. There's a front PTO, which leaves you with loads of options. I'm sure we will see some nice MODs being published in the future.

Rotating the cab is quite fun to do. It works as expected and the automatic raising and lowering of the cabin adds coolness to the operation. Thumbs up for the rotating cab :thumbup:

Then there's the three mode steering. Basically the steering modes work fine. The mechanism is very clever. So it all good? Well, there are some minor issues. Turning the steering gear needs quite a bit of force, which can result in accidentaly turning the cabin instead of steering. Another issue is the significant amount of slack in the steering mechanism. New wheel hubs were introduced this year, but they are no improvement in terms of slack. This model is best steering when driving it. This will reduce the amount of force on the steering linkage and it will also diminish the slack. All in all the steering modes work properly and the entire steering mechanism is awesome. This makes up for the lack of rear wheel steering in the Porsche!

Like I said earlier; usually I am not a big fan of cranes. However, this one works properly. The motorized functions have been implemented very well. They are easy to operate, without confusion about which function does what. The manual functions work as expected, nothing special.

I haven't paid much attention to the tires so far. I reckon they deserve a review of their own. Enough has been said about them already, so I will simply echo what other have been saying; they are awesome! Best tire since the Unimog tires. They have enough grip for Truck Trial. One thing I am not sure about though is how well they will stick to the rim. As you can see in the video, they detach pretty easily. Something which might happen when driving through rough terrain. I hope TLG will release a smaller version of these tires in the near future, for other tractors or even combine harvesters.

Both the attachments can be mounted and dismounted easily and the mechanisms to do so are nifty. Attaching an axle to the PTO can be tricky, but it will get easier after some practice.

B-MODEL

When building the B-model the tractor remains intact. The crane turns into a silage plow, which actually looks quite good. I will leave this one for you to build :wink:

SUMMARY

To summarize how I feel about this set is pretty easy. I love it! This set has everything a proper Technic set should have. Stunning looks and lots of great functions. Not sure if this is the best Technic set ever, but it is the best Technic set I ever reviewed.

PROS

  • Looks amazing
  • Lots of functions
  • Super cool three mode steering
  • Functions working properly
  • Lots of playability
  • Front and rear PTO
  • Suitable for MODding
  • Lots of new pins and connectors
  • Cool new tires
  • Some parts in new colors
  • Battery box nicely tucked away inside the model

CONS

  • Slack in steering
  • Steering needs some force and can result in turning the cabin instead
  • Makes you want another one :wink:

I'd like to stress that these cons are really minor cons!

SCORE

Okay, so how do I grade this set?

9 DESIGN

16218294336_cc3a1c982b_m.jpg

CLAAS written all over it. Looks amazing.

9 BUILDING EXPERIENCE

16218294336_cc3a1c982b_m.jpg

Starts a bit unstructured, but ends well.

10 FEATURES

16244195295_e24aaaa114_m.jpg

Can't do any better than this.

9 PLAYABILITY

16218294336_cc3a1c982b_m.jpg

All the cool functions offer lots of playability

9 PARTS

16218294336_cc3a1c982b_m.jpg

High quantities of new pins and connectors. Oh, and them tires!

9 VALUE FOR MONEY

16218294336_cc3a1c982b_m.jpg

This is what to expect of a big Technic set.

9,2 PINNACLE OF LEGO TECHNIC

FINAL WORDS

This set will be modified heavily, utilizing the front and rear PTO. Can't wait to see what people come up with. It's only a matter of time before we see a double wheeled version:

Claas-XERION-Front.jpg

Well, that didn't take long (posted by ctx1769, see next page):

tumblr_obiac0A5981vcczb0o1_540.jpg

And what to think of a potential new CLAAS Lexion Combine Harvester with new smaller versions of the CLAAS tires in the rear. Yes please!

Thanks you for reading this review. All pictures can be found in my album.

Share this post


Link to post
Share on other sites

Again, sorry it took so long! There's enough information available already, but I hope you still enjoy reading it. I haven't double checked the content, so if you see any mistakes, let me know.

Share this post


Link to post
Share on other sites

Great review as always. Thank you for all your hard work Jim.

If you'd not told us why your review was delayed I'd have put it down to the time needed to take all those beautifully shot photos. Outstanding.

Edited by grum64

Share this post


Link to post
Share on other sites

Amazing review as always Jim, when you mention the battery box and motor you need to switch the two around, the motor is sealed and the battery box is not, but other then that the review looks flawless. Off to work now:)

Share this post


Link to post
Share on other sites

Amazing review as always Jim, when you mention the battery box and motor you need to switch the two around, the motor is sealed and the battery box is not, but other then that the review looks flawless. Off to work now:)

:tongue: (thanks)

Great review as always. Thank you for all your hard work Jim.

If you'd not told us why your review was delayed I'd have put it down to the time needed to take all those beautifully shot photos. Outstanding.

Thanks mate. Funny thing is that building the model and taking the pictures don't take quite as long as the write-up. Well I guess it's 50/50 for building and pictures vs the written part.

Share this post


Link to post
Share on other sites

Thank you for the great review and the very high quality photo's!

(the videos are still private! and the motor was sealed, not the batterybox!)

Share this post


Link to post
Share on other sites

Thank you for the great review and the very high quality photo's!

(the videos are still private! and the motor was sealed, not the batterybox!)

Damn...forgot the videos. Just a sec. Battery box has been corrected :thumbup:

Videos have been published!

Share this post


Link to post
Share on other sites

Another great review as usual Jim ! And great looking photos ! Just can't see the videos yet.

When will it be possible to order the new tires and rims from TLG ??

Edited by TechnicHead41

Share this post


Link to post
Share on other sites

Just can't see the videos yet.

Are you sure? The videos have been made public.

Can't see this?

Share this post


Link to post
Share on other sites

Thanks for an excellent review!

I discovered this little thing: "If you are in need of Axle with Pin Hole from 2016, look no further. This set contains 49 of 'em. Yes that's right, 49!! And 14 of its axle counterpart Pin with Pin Hole from 2014." According to the parts list, it seems like the amounts have been swapped between these two. The pictures also indicate the same.

Edited by kolbjha

Share this post


Link to post
Share on other sites

Thanks. I will correct it.

Share this post


Link to post
Share on other sites

Nice review and good pictures. For me this is the winner this year, followed by the Volvo EW160E.

Share this post


Link to post
Share on other sites

Thanks. I will correct it.

Corrected!

Are the videos visible?

Share this post


Link to post
Share on other sites

I got 2 sets to do the double wheeled version :grin:

Yes!! I knew someone would step up :laugh::thumbup:

Share this post


Link to post
Share on other sites

Thanks Jim for fully detail review again.

At least clarifying one thing I didn't get it when seeing steering angle does not reach to maximal angle.

New tires really are huge . :laugh:

Share this post


Link to post
Share on other sites

Well, you did it again Jim! :wub: Maybe the delay results in an even better review... :tongue: You really going in depth with this one, and I'm honest to tell that I do not read much reviews, but this one I read "most" of it... :laugh: :laugh:

This is a Technic set I would love to have, and this time not only for the parts... :grin: ...it really is appealing and I will get one for sure...

One off topic note, the dishes show me a secret. You have those amazing light boxes, that explains a lot... :wub::thumbup::laugh::wink:

Share this post


Link to post
Share on other sites

One off topic note, the dishes show me a secret. You have those amazing light boxes, that explains a lot... :wub::thumbup::laugh::wink:

Hehe indeed. I was about to retake the picture, but I figured...let's leave it in the review.

Share this post


Link to post
Share on other sites

Nice review, as usual, but there's a build error, you forgot two of the front headlights :classic:

89120790-a3c8-4542-b623-71977f7a3907.jpg

Anyway, for me this is the best & best looking technic set so far (even if the color of the lime parts doesn't quite match)...and my colleagues borrowed mine to play with it quite a bit :laugh:

Edited by charlesw

Share this post


Link to post
Share on other sites

Nice review, as usual, but there's a build error, you forgot two of the front headlights :classic:

Very sharp! Could have figured looking at the left over parts. Thanks. I will include your image in my review.

Share this post


Link to post
Share on other sites

Both mirrors are not mounted correctly. The end of the Gray axle should not be visible.

Edited by AFOL1976

Share this post


Link to post
Share on other sites

Nice review Jim.

Curiously in my one received and built yesterday, I have only 2 1L liftarms as left over parts !

Edit: Understood, you missed 2 of them at the top of the mirrors.

Edited by Toitoine

Share this post


Link to post
Share on other sites

Both mirrors are not mounted correctly. The end of the Gray axle should not be visible.

That's probably where I missed the 1L connectors :hmpf_bad:

I must admit that I was somewhat hasty when building. That's the downside of pressure.

Well, we do have ourselves a nice competition. Spot the mistakes :tongue:

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.