Elrond Posted July 3, 2015 (edited) Hello everyone, As promised in the official Jurassic World thread, I'm sharing the LDD models I made of some of the JW vehicles. Like many of you, I was a little disappointed by the vehicle builds in this theme and wanted to make my own more movie-accurate versions of some of them. Most are heavily inspired by offical LEGO builds (mostly from the City line). Note that the stickers are obviously missing from the vehicles so I'm afraid you'll have to use your imagination for that part. The first vehicle is loosely inspired by the Textron Tiger armoured truck which appears towards the end of the movie. It is based on the offrad pickup truck from the 1st Avengers movie (set 6867). I turned it into a two-seater and added the rear section. JW Textron Tiger 1 by Elrond Half-elven, sur Flickr JW Textron Tiger 3 by Elrond Half-elven, sur Flickr Up next is the Mercedes-Benz Sprinter van used by the ACU to track the I-rex. This one is based on an ambulance from the City theme (set 4431). JW Sprinter 1 by Elrond Half-elven, sur Flickr There's enough room for about 4-5 figures in the back but it's a tight fit... JW Sprinter 4 by Elrond Half-elven, sur Flickr The next vehicle is the ACU 6x6 G36 from the same scene. This one is an original design but I'm still not 100% please with how it turned out. Hopefully you'll still like it and maybe some more talented builders will improve it. JW 6x6 1 by Elrond Half-elven, sur Flickr JW 6x6 3 by Elrond Half-elven, sur Flickr Here's how it looks next to the Sprinter van. JW by Elrond Half-elven, sur Flickr Next is the G-class SUV, which is pretty much JW's version of the Jeep Wrangler. I made two versions of this one, the first of which is pretty much a recoloured police SUV from set 4440. JW Mercedes 1 by Elrond Half-elven, sur Flickr I then made a second version of the car, which is a two-seater with working doors. JW Mercedes 2 by Elrond Half-elven, sur Flickr And finally, we have the Unimog. I used City set #60083 (which is a much better representation of a Unimog than the JW one) as a base for this one and tried to improve the official LEGO design from the JW theme. JW Unimog 1 by Elrond Half-elven, sur Flickr JW Unimog 2 by Elrond Half-elven, sur Flickr The rear section was made shorter and I completely modified the interior but you can still fit standing minifigs in there without problems. JW Unimog 3 by Elrond Half-elven, sur Flickr Here's an example of the vehicle with a different rear section (this one is inspired by set 4205). JW Unimog 4 by Elrond Half-elven, sur Flickr JW2 by Elrond Half-elven, sur Flickr If you guys like them, here's the LDD file containing all the vehicles: Jurassic World Vehicles.lxf Thank you for stopping by. ;) Edited July 3, 2015 by Elrond Share this post Link to post Share on other sites
Tom Jurassic Posted July 3, 2015 Dude these are fantastic and are very accurate to the source material for the city-style scale you chose to work in! I love them! They all look really, really awesome man. I'll definitely be looking into ordering the parts to make some of these in the future, and if I use them anywhere I will 100% be sure to credit you. I just wish I had more ACU troopers than like the five in total you get from buying all the sets! Great work Share this post Link to post Share on other sites
Elrond Posted July 3, 2015 Dude these are fantastic and are very accurate to the source material for the city-style scale you chose to work in! I love them! They all look really, really awesome man. I'll definitely be looking into ordering the parts to make some of these in the future, and if I use them anywhere I will 100% be sure to credit you. I just wish I had more ACU troopers than like the five in total you get from buying all the sets! Great work Thank you for your kind words, it really means a lot. As for the ACU guys, I think I'll buy a second helicopter for the parts, the second pteranodon and the trooper. There's also the upcoming Dimensions set, which seems to be the cheapest way to get them so far (although that also means having a bunch of Owens...). Oh and just a little something I forgot to mention in the original message, I chose to use white bricks for the Unimog and the standard 4x4 but you might want to use light grey instead. The thing is those vehicles are metal grey in the movie but since the colour doesn't exist in the LEGO palette (at least outside of grids and stuff like that), I had to choose between white and light grey. I eventually chose white because I thought it looked more unique and seemed to work best with the stickers but I guess that's a matter of personal tastes. Share this post Link to post Share on other sites
Tom Jurassic Posted July 3, 2015 Thank you for your kind words, it really means a lot. As for the ACU guys, I think I'll buy a second helicopter for the parts, the second pteranodon and the trooper. There's also the upcoming Dimensions set, which seems to be the cheapest way to get them so far (although that also means having a bunch of Owens...). Oh and just a little something I forgot to mention in the original message, I chose to use white bricks for the Unimog and the standard 4x4 but you might want to use light grey instead. The thing is those vehicles are metal grey in the movie but since the colour doesn't exist in the LEGO palette (at least outside of grids and stuff like that), I had to choose between white and light grey. I eventually chose white because I thought it looked more unique and seemed to work best with the stickers but I guess that's a matter of personal tastes. The Unimog looks great in the white colour. :) I might try and source some ACU on Ebay :) Share this post Link to post Share on other sites
__________________________ Posted July 4, 2015 This looks great! I reccomend POV-Ray to get higher-quality renders. Just leave your computer running for a while. Share this post Link to post Share on other sites
Imanol BB Posted July 15, 2015 (edited) hello, finally i found this topic; i make my models based in the movie vehicles, but some time ago, i found that its more easier if you make them based in the LEGO game, see in this page, there are almost all the vehicles of the 4 movies in LEGO: http://www.igcd.net/...1333&width=1280 , but sadly, there arent instructions, but if you have a good eye, and you are very detailed, you can try to build thems, i am right now, trying to finish the Pinzgauer, and before i found this page, i made the JW unimog: http://ldd.us.lego.c...a6-8362f295cd1b , as you can see, it seems to be very basic, but it has a very nice and modular frame with realistic suspension. I hope this help you to make more vehicles, and i will upload the Pinzgauer picture and instructions once i finish it; and nice all of your creations. Edited July 16, 2015 by LuxorV Share this post Link to post Share on other sites
Imanol BB Posted July 16, 2015 Finally its complete, i have finished the Pinzgauer, here you got:https://www.dropbox.com/home/lego%20JW , there are some missing parts that i didnt find in LDD, but i tryed to replace them, i hope you like it. Share this post Link to post Share on other sites
Kamil Z Posted July 18, 2015 Very nice! Wat better than what Lego came up with. Share this post Link to post Share on other sites
Imanol BB Posted August 28, 2015 a new creation, Mercedes Benz g63 AMG 6x6: this model has my fully working suspension v3, which also comes in my off roading trucks, i hope you like it. Share this post Link to post Share on other sites
ritzcrackerman Posted July 2, 2019 *bumped* Do you still have the Pinzgauer available to share? On 7/3/2015 at 2:07 PM, Elrond said: Hello everyone, As promised in the official Jurassic World thread, I'm sharing the LDD models I made of some of the JW vehicles. Like many of you, I was a little disappointed by the vehicle builds in this theme and wanted to make my own more movie-accurate versions of some of them. Most are heavily inspired by offical LEGO builds (mostly from the City line). Note that the stickers are obviously missing from the vehicles so I'm afraid you'll have to use your imagination for that part. The first vehicle is loosely inspired by the Textron Tiger armoured truck which appears towards the end of the movie. It is based on the offrad pickup truck from the 1st Avengers movie (set 6867). I turned it into a two-seater and added the rear section. JW Textron Tiger 1 by Elrond Half-elven, sur Flickr JW Textron Tiger 3 by Elrond Half-elven, sur Flickr Up next is the Mercedes-Benz Sprinter van used by the ACU to track the I-rex. This one is based on an ambulance from the City theme (set 4431). JW Sprinter 1 by Elrond Half-elven, sur Flickr There's enough room for about 4-5 figures in the back but it's a tight fit... JW Sprinter 4 by Elrond Half-elven, sur Flickr The next vehicle is the ACU 6x6 G36 from the same scene. This one is an original design but I'm still not 100% please with how it turned out. Hopefully you'll still like it and maybe some more talented builders will improve it. JW 6x6 1 by Elrond Half-elven, sur Flickr JW 6x6 3 by Elrond Half-elven, sur Flickr Here's how it looks next to the Sprinter van. JW by Elrond Half-elven, sur Flickr Next is the G-class SUV, which is pretty much JW's version of the Jeep Wrangler. I made two versions of this one, the first of which is pretty much a recoloured police SUV from set 4440. JW Mercedes 1 by Elrond Half-elven, sur Flickr I then made a second version of the car, which is a two-seater with working doors. JW Mercedes 2 by Elrond Half-elven, sur Flickr And finally, we have the Unimog. I used City set #60083 (which is a much better representation of a Unimog than the JW one) as a base for this one and tried to improve the official LEGO design from the JW theme. JW Unimog 1 by Elrond Half-elven, sur Flickr JW Unimog 2 by Elrond Half-elven, sur Flickr The rear section was made shorter and I completely modified the interior but you can still fit standing minifigs in there without problems. JW Unimog 3 by Elrond Half-elven, sur Flickr Here's an example of the vehicle with a different rear section (this one is inspired by set 4205). JW Unimog 4 by Elrond Half-elven, sur Flickr JW2 by Elrond Half-elven, sur Flickr If you guys like them, here's the LDD file containing all the vehicles: Jurassic World Vehicles.lxf Thank you for stopping by. ;) Do you still have the .lxf file available? I am refining a massive JW layout, and would love to use some of your ideas! @Elrond Share this post Link to post Share on other sites
Elrond Posted August 1, 2019 On 7/2/2019 at 5:58 AM, ritzcrackerman said: *bumped* Do you still have the Pinzgauer available to share? Do you still have the .lxf file available? I am refining a massive JW layout, and would love to use some of your ideas! @Elrond I did not make the Pinzgauer, this was Imanol's creation. All the vehicles I made are in the file I posted in the original message. :( I'm currently remaking the G-wagen though so maybe I'll post an update if I'm happy with the end result. Share this post Link to post Share on other sites
ritzcrackerman Posted August 14, 2019 On 8/1/2019 at 4:20 PM, Elrond said: I did not make the Pinzgauer, this was Imanol's creation. All the vehicles I made are in the file I posted in the original message. :( I'm currently remaking the G-wagen though so maybe I'll post an update if I'm happy with the end result. @Elrond file is downloadable but unable to load. I'll try through Studio and see if any better results. Share this post Link to post Share on other sites
r5-j2 Posted August 14, 2019 (edited) Elrond, the Merc 6 wheeler and the Unimog are so instantly recognisable, I love these concepts....; here we see you out-doing Lego`s in house designers and coming up with some great vehicles and your designs have a simplicity and shaping that just works so well! Regards Kenny Edited August 14, 2019 by r5-j2 Share this post Link to post Share on other sites
Imanol BB Posted September 13, 2019 Hi, sorry for the long wait, here is the file for the Pinz, i hope you enjoy it: https://bricksafe.com/files/imanol/models/city/Jurassic World Pinzgauer 718M.lxf Share this post Link to post Share on other sites
