Search the Community
Showing results for tags '10x6'.
Found 2 results
-
[WIP] 10x6 Foden S108 R4 Tractor Unit With Truck Mounted Crane
Kiwi_Builder posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hey all, For the past few weeks I have been working on my latest project, a 10x6 Foden S108 R4 tractor unit with a truck mounted crane. I am about 70% of the way through and thought that it was about time that I released this project to the world. After having been given a request to build a truck with a crane on it so I thought I might as well go all out As the title implies it is a five axle beastie with the three rear axles driven by two L motors mounted on either side of the chassis and the two front axles steering through a servo motor. As the images show the truck has the chassis built, the rear stabilisers and the forward mounted crane attached, with the crane being a modified version of the 8258's crane, with two M motors mounted in it for movement which will be controlled from a control panel on the left side of the truck. Although the truck is already quite heavy without the cab attached, the hard coupled L motors appear to be able to drive the truck at a pretty decent speed with a reasonable amount of torque backing it up. The one main issue that I have found so far is that the crane, when fully extended, can only reach to the rear of the truck which is a bit of a pain with this being a tractor unit. This Flickr album I found by Hilifta/Mike Cornwall has images of what I am attempting to recreate. NOTE: Don't expect my MOC to have the same colour scheme as those in the reference images due to the limitations of the colours of my parts collection Enough of the rambling on about it, time to give you some idea of how it looks: Then of course, we have the all important bottom shots Things that I still have to complete are the front stabilisers, motorising the stabilisers to make them RC controllable, finish the rear bodywork and build the cab. I will hopefully have more photos to share with you soon, all advice and and comments are appreciated. As always more photos of this build and many of my others can be found on my Bricksafe: http://bricksafe.com/pages/Kiwi_Builder/Technic Cheers -
[MOC] 10x6 Foden Crane Truck W. Extending Trailer
Kiwi_Builder posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hey all, My latest MOC is modeled off of a 10x6 Foden S108 crane truck tractor unit run by Mackenzie Transport of Auckland. There are some differences between the real truck and my MOC such as their trucks are white but mine was made in red due to parts constraints and the other difference being that the original Palfinger truck mounted crane on the truck has a five-stage extension on it but my version only has two-stage extension because that was the most I could have before the crane arm became too large and out of proportion. Photos of the original truck can be found here: https://www.flickr.c...ith/6161598123/ MOC's Features: HOG steering Live axle suspension on the rear axles Pneumatically controlled pendular suspension on the front axles Stabilizers Locking turntable Tilting cab with straight six piston engine under the cab Full interior of cab with suspended seats Motorized truck mounted crane with two-stage extension Custom stickers LED running lights The combination with everything expanded This photo is one of my favourites and shows the custom stickers of badging and the original number plate from the truck The truck on its own Everyone's favourite photo, the under shot This photo shows the controls for the crane (the PF switches) along with the switch and pump for the front air suspension The engine without the cab attached The interior The mechanism for seat suspension LED running lights Now for the trailer, a three axle extending trombone trailer. It has full independent suspension, landing gear and of course an extending deck. The trailer extends 29 studs, bringing it to a total deck length of 122 studs/97.6CM. Trailer when extended with lattice boom load Trailer when retracted Trailer suspension system Underside when extended Underside when retracted Another photo of the combination Statistics: Total length with trailer extended: 173 studs/138CM Length of truck: 77 studs/61.6CM Width: 19 studs/15.2CM Height: Truck weight: 2.4KG Trailer weight: 0.8KG Load weight: 0.2KG Pieces count: 4000 +/- Time to build: 60+ hours This is the first time I have used a white background instead of no background and I am very pleased with the results and will definitely do it again. As always more photos can be found on my Bricksafe and for the first time, a video can be found on my YouTube channel! I hope you enjoy my MOC as much as I do Bricksafe: http://bricksafe.com...e/completed-moc YouTube: https://www.youtube....876u7IUZPRGhwrQ