Superkalle

Most wanted bricks for next LDD update

419 posts in this topic

With all the new bricks added to 4.2.5, many because of requests by us LDD users, I (well, it was actually Calabars idea :classic: ) thought we needed a new topic for brick requests.

So fire away with your most wanted bricks. Please be sure to add a link to BrickLink (or include a small thumbnail) so it's easy to see which brick you are refereing to.

Share this post


Link to post
Share on other sites

60599.jpgRequest for 60599 2x4x6 Door Frame

Part 60599 is a 2x4x6 Door Frame. According to Bricklink, it appears in 19 sets. It has been in production for several years and appears in the 2012 set 4625.

x67.gifRequest for 40233 Headgear Hair Short, Tousled (Harry Potter)

Part 40233 is a Harry Potter wig. According to Bricklink, it appears in 51 sets.

93563.jpgRequest for 93563 Minifig, Headgear Hair Mohawk

Part 93563 is a wig. According to Bricklink, it appears in 1 set. It is so delightfully weird.

3626bpb324.jpgRequest for 3626bpb324 Minifig, Head Female with Eyepatch and Large Red Lips Pattern

Part 3626bpb324 is a minifigure head. According to Bricklink, it appears in 2 sets. Several men have eyepatches in LDD but no women. This is terribly unfair! I call upon TLG to right this terrible gender inequality and provide at least one female with an eyepatch in LDD! :wink:

Edited by ok13

Share this post


Link to post
Share on other sites

x1192px1 / x1192px2 / x1192px3

All essentially the same element, just with different colored inserts.

111

An older version of 111b

I'm sure I could think up a huge list of elements I'd like to see be included, but these are the ones that immediately came to mind.

Share this post


Link to post
Share on other sites

x1192px1 / x1192px2 / x1192px3

All essentially the same element, just with different colored inserts.

111

An older version of 111b

I'm sure I could think up a huge list of elements I'd like to see be included, but these are the ones that immediately came to mind.

If it helps the LDD team, the Design ID for the second part is 32175, and the design ID for the second is (as far as I can confirm) 47326. Remember that especially for parts appearing in post-2006 sets, you can plug their numbers into the URL of a Customer Service replacement part page to look up their Design IDs. Multicolored or decorated parts are sometimes exceptions to this, but I think it will still help the LDD team to give them proper Design IDs rather than just Bricklink IDs.

Share this post


Link to post
Share on other sites

Good afternoon, I've found some parts I would really like to see in LDD, but because I haven't made 5 posts yet, I cannot yet use links.

So this is a message that isn't really usefull, but helps me to make 5 post (I don't really know how many posts I have to make :$)

Edited by Stephan

Share this post


Link to post
Share on other sites

Good afternoon, I've found some parts I would really like to see in LDD, but because I haven't made 5 posts yet, I cannot yet use links.

So this is a message that isn't really usefull, but helps me to make 5 post (I don't really know how many posts I have to make :$)

Oh, I forgot about that. I guess I should make the LXF available for all to download. I'll look into it.

In the meantime, why not make a post in the welcome topic: http://www.eurobricks.com/forum/index.php?showforum=17

Share this post


Link to post
Share on other sites

Choo-choo train fanatic Most Wanted List:

Train Tracks:

- Get rid of the rail tracks that in LDD do not fit onto other elements such as ground plates (74745 Curved & 74746 Straight)

- Retain the rail tracks that do (53400 Curved and 53401 Straight)

- Replace current rail switches / points (75541 Right & 75542 Left, they also do not fit onto other bricks) with identical switches/points that do fit onto other bricks and can be used with rail tracks 53400/53401. Design IDs for these switches are 53403 (Switch Right) and 53406 (Switch Left). Note that these differ form the parts numbers in Peeron/Bricklink (53404 and 53407 respectively)

- Introduce Control Switch 2866 (for the rail switches / points)

- Introduce Train Track Crossing 32087

- Introduce Train Track Double Crossover (Half) 60128 (LEGO Design ID 57794, Crossing 1/2 With Switch)

Other Train Parts:

- Introduce Train Door Sliding - Type 2 2874

And I support the already mentioned Window 1x4x5 (2493) (I need it for the Train Engine Shed 10027) and Black Door 1x4x5 Right with 6 Panes (73312) (used in Cafe Corner).

Share this post


Link to post
Share on other sites

Well, I've made my five posts (woehoe!)

Here's my wishlist (so I can finally finish my Nitro Muscle/Menace):

32195b

Technic, Steering Arm 6.5 x 2 with Towball Socket Rounded, Chamfered

1825

Tire 81.6 x 36 R Technic Straight Tread

46453

Technic Engine Tuneable, Block with Trapezoidal Air Scoop (for part 2133)

44350

Technic, Panel Fairing #20 Large Long, Small Hole, Side A

44351

Technic, Panel Fairing #21 Large Long, Small Hole, Side B

46452

Technic Engine Tuneable, Block with Two Round Air Scoops (for part 2133)

61287

Cyclinder Hemisphere 2 x 2 with Cutout

These are the one's I needed recently.

Edited by Stephan

Share this post


Link to post
Share on other sites

So, I wrote a nice introduction

Introduction of moi

No new parts I really need :P

Stay tunned...

Excellent. Now you you only have to make one more post, and you're up to 10, and then you can use the PM system. Ain't that nice. :sweet:

Share this post


Link to post
Share on other sites

And here's my tenth post :)

I don't really have a parts request, but I do have an other request. I would like to see more parts (Flex Axles, Outer Cables) have the abbility to flex. Now you can only use the Flex Tool for a handfull of parts.

It would be nice to see my Seattle Space Needle taking its shape as well as my Nitro Muscle/Menace.

That's my wish until now :)

Have a nice evening everybody!

Edited by Stephan

Share this post


Link to post
Share on other sites

What happened to my post at #2 containing the link to the previous post? *huh*

Here is my list, partially recovered from the old topic:

Hight Priority

4737 Panel 4x4x6 Corner Convex Ribbed (was available in LDD3)

3149c01 Hinge Plate 2x5 - Complete Assembly

43753 Minifig, Headgear Hair Swept Back Tousled

3947a Baseplate, Raised 32x32 Crater Plate without Crater Studs

4089 Slope 33, Inverted 3x2 Hollow with Towball (Arm Piece)

4626 Hinge Bucket 2x3 Curved Bottom, Hollow, with 2 Fingers

792c01 Arm Holder Brick 2x2 without Hole and 1 Arm (and similar pieces with 0 and 2 arms)

3613 Arm Piece with Towball Socket, 3 Fingers

4873 Black Bar 1x6 with Studs Open

73037String Reel Winch 2x4x2

39 Window 1x1x1

x105 Minifig, Visor Old with Grille and Feather

3144 Antenna with Side Spokes

4587 Horse Hitching with Hinge

251c01Turntable 2x2 Plate with Hinge

3597 Hinge Plate 2x4 - Female

3315 Hinge Plate 2x4 - Male

4071 Door Frame 2x6x7

4611 Door 1x6x7 Barred

3497 Baseplate 8 x 24

Lower Priority

30014 Arm Holder Brick 1x2 with 2 Horizontal Fingers

122c01 Plate, Modified 2x2 with Wheels

4085a Plate, Modified 1x1 with Clip Vertical - Type 1

73312 Door 1x4x5 Right with 6 Panes

4491aHorse Saddle with One Clip

39bc01 Window 1x1x1 (old type) with Extended Lip, with Glass

3596Flag on Flagpole, Straight

132-old Tire Smooth Old Style - Small

3462Plate, Modified 2x3 with Helicopter Rotor Holder

[/url] Propeller 4 Blade 5 Diameter with Hole for Rotor Holder

3481 Plate, Modified 2x2 with Helicopter Tail Rotor Holder

3480 Propeller 2 Blade Helicopter Tail

8 Plate, Modified 2x2 with Wheel Holder Bottom

4265a Technic Bush 1/2 Toothed Type I

3626ap01 Minifig Head with Solid Stud

In general, I'd like to see more raised baseplates (3947a was only an example) or baseplates with old typ road (such as 6100px2), and more decorations, especially for minifig torso and face (some old one), and 2x1 brick.

Share this post


Link to post
Share on other sites

I would like to see part 2880

Hinge Bar 2.5L with 2 and 3 Fingers on Ends (Pantograph Shoe Holder)

So I can finally finish my Sopwith Camel and Red Baron 100% (except for the strings with knobs)!

Share this post


Link to post
Share on other sites

I would like to see part 2880

Hinge Bar 2.5L with 2 and 3 Fingers on Ends (Pantograph Shoe Holder)

Quote for this part! :thumbup:

It recurs in a pair of sets I'm interested to.

Share this post


Link to post
Share on other sites

Most important to me as super fan of unimog 8110:

60c01.gif60c01 (Technic, Gear 24 Tooth Clutch)

x189c01.gifx189c01 (Pneumatic Cylinder with 2 Inlets Small (32mm))

47224c01.gif47224c01 (Pneumatic Cylinder with 2 Inlets and Rounded End Medium (48mm))

95292c01.jpg95292c01 (Technic, Shock Absorber 9.5L, Complete Assembly (Extra Hard Spring))

99798c01.jpg99798c01 (Pneumatic Pump Small (6L))

92908.jpg92908 (Technic, Steering Portal Axle, Housing)

92910.jpg92910 (Technic, Steering Ball Joint Large Open with C-Shape Pivot Frame)

32494.gif32494 (Technic, Steering CV Joint)

92911.jpg92911 (Technic, Steering Ball Joint Large Receptacle)

4694b.gif4694b (Pneumatic Switch with Pin Holes)

92909.jpg92909 (Technic, Steering Portal Axle, Hub)

99021.jpg99021 (Pneumatic Hose Connector with Axle Connector)

And a a special wish:

Please make the linear actuators 61927 adjustable.LAadjust.png

... and the pneumatic cylinders and pumps.

Greetings to all

PS: If the LDD Developers install an interface for creating parts (with necessary examination) in future versions, the community would sure like to help to perfect the software.

Or is this too complicated?

PS 2: In LDD please make a setting for proxy connection with authentication.

Edited by PeterleB

Share this post


Link to post
Share on other sites

I was going through your list when I spotted this, and it is allready in LDD :classic:

Absolutely true: I already used this brick to update my Fire Station 6382 (not posted yet).

Probably I forgot to delete the request, as I recycled the old wishlist! :tongue:

Not I edit my previous post.

Share this post


Link to post
Share on other sites

I've looked at Hero Factory parts that might be desirable on LDD and have tried to prioritize them. All ID numbers are Design IDs, with Bricklink IDs in rectangular brackets where applicable. All names are Bricklink names.

These ones are high priority-- they all appear in sets this year, and for all I know some of them might already be in the works for a future LDD update:

61798	Bionicle Wing Large with Hologram Pattern Effect (Gorast)
87802	Hero Factory Mask (Stormer)
87817	Hero Factory Mask (Stringer)
98530	Hero Factory Mask, Left Half (Splitface)
98578	Hero Factory Weapon - Spiked Ball, Half

98579	Hero Factory Mask (Toxic Reapa)
98581	Hero Factory Mask, Insect
98582	Hero Factory Mask, Robotic Shark
98603	Hero Factory Chest Armor Small
98613	Hero Factory Arm / Leg Extender with Ball Joint and Ball Socket

These ones are medium priority. They appeared in the Hero Factory theme and have been used in more than ten sets each. So I'm selecting these based on the likely demand rather than personal need or preference:

32173	Technic Ball Joint 2 x 7 with 2 Ball Joints
45749	Bionicle Rahkshi Leg Lower Section
47298	Bionicle Toa Metru Foot
47300	Bionicle Ball Joint 3 x 3 x 2 90 Degree with 2 Ball Joints and Axle hole
47328	Bionicle Vahki Leg Lower Section

53544	Bionicle Toa Inika Upper Arm Cover
53562	Bionicle Foot Piraka Mechanical
57528	Bionicle Weapon Claw Blade Small
60990	Bionicle Engine Jet Pack (Toa Lewa)
62386	Bionicle Foot with Ball Joint Socket with Flat Top 3 x 6 x 2 1/3

Other than these 20 parts and parts already mentioned by other members, there are 30 other Hero Factory/BIONICLE parts I'd like to see on LDD:

44847	Sports Hockey Skate
57575	Bionicle Mask Hydraxon
60900	Bionicle Arm / Leg Upper Section (Solek)
60917	Bionicle Toa Pohatu Lower Arm Section
60918	Bionicle Makuta Torso with 2 Ball Joints

60926	Bionicle Weapon Blade Claw (Antroz)
60928	Bionicle Weapon Hook Blade (Chirox)
60935	Bionicle Wing Large
61794	Bionicle Weapon Mistika Nynrah Ghost Blaster Scope with Crosshairs (Toa Gali)
90795	Bionicle Weapon Small Blade with 4 Spikes, Marbled Yellow Pattern (HF Xplode) [61807pb02]

64272	Bionicle Shoulder Armor, Vorox
64299	Bionicle Weapon Double Curved Blade (Mata Nui Scarab Shield Half)
64330	Bionicle Mask Cendox V1 / Kaxium V3 Flip Mask 
87800	Hero Factory Weapon - Ice Arm with Trans-Light Blue Icicle Blade [87800pb01]
87801	Hero Factory Chest Armor with Triple Spiked Shoulders

87803	Hero Factory Weapon - Energized Harpoon with Lime Boomerang [87803pb01]
87809	Hero Factory Weapon - Heavy Metal Shooter Arm
87810	Hero Factory Chest Armor with Single Spiked Shoulders
87815	Hero Factory Weapon - Sonic Blaster Arm
87816	Hero Factory Chest Armor with Double Spiked Shoulders

87820	Hero Factory Shield, Type 1
87822	Hero Factory Mask (Meltdown)
87823	Hero Factory Mask (Corroder)
87824	Hero Factory Mask (Thunder)
87825	Hero Factory Shield / Armor Spiked with Marbled Yellow Pattern [87825pb01]

87827	Hero Factory Weapon - Corroder Claws
87828	Hero Factory Weapon - Crush Claw
87831	Hero Factory Mask (Rotor)
87839	Large Figure Arm / Leg Section with 2 Ball Joint Sockets (Ben 10)
92238	Hero Factory Mask (Witch Doctor)

Share this post


Link to post
Share on other sites

I would like to see the remaining Hero Factory Hero and Villain Helmets appear in the next LDD update.

Share this post


Link to post
Share on other sites

It seems the number for this one (array of decorative packed together parts) is 93081..

but anyway, this: 93081c.jpg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.