Sign in to follow this  
Followers 0
TheBrickster

Review: The White House

On a scale of 1 to 5   69 members have voted

  1. 1. How do you rate this set?

    • 1 - Poor
      5
    • 2 - Below Average
      6
    • 3 - Average
      27
    • 4 - Above Average
      18
    • 5 - Outstanding!
      13

Please sign in or register to vote in this poll.

19 posts in this topic

gallery_2351_18_164.gif

00box1.jpg

Welcome to this exclusive LEGO EB review of the new 2010 Architecture set, 21006 The White House.

Set Name: The White House

Theme: Architecture

Year Released: 2010

Pieces: 560

Price: $49.99 USD

Special Elements: 2x4 black and light grey tiles, White House printed tile

The back of the nice black box includes a brief history of the White House:

00box2.jpg

A close up of the history of the White House and James Hoban, White House designer:

01history.jpg

While I knew this Architecture set would be small before opening, I was surprised to find this many pieces (560) within the box:

02bricks.jpg

After about one hour worth of building (and a little television in between), I was almost ready for the roof. The most tedious part of the build was creating 16 of the same sub-assemblies of the small black windowed wall sections that go between the columns of the house:

03build.jpg

About 1.5 hours of building time, I had completed the house:

04complete.jpg

A diagonal view:

05diagonal.jpg

Trans grey bricks would have made better windows than the holed black 1x1 bricks. Holed bricks, you ask? Yes, not quite sure why, but all the black window sections use black holed 1x1s turned to show the non-holed side:

06side.jpg

One of the trickier parts of the build was adding the columns to skellie arms in the back of the house:

07back.jpg

Four of the columns attach to the skellie arms, and two to regular 1x1 hooks:

08close.jpg

The roof uses standard black slopes. In this picture, you can also see the new 2x4 tiles:

09roof.jpg

For size comparison, here is minifig next to the White House:

10size.jpg

And compared to something a little larger, a small dinosaur:

11dino.jpg

Lastly, the extra pieces:

12extras.jpg

Thoughts of this set:

This is my first Architecture set. I didn't plan to buy any of these models but have an admiration for Federal architecture, and of the history of the White House. I do appreciate and applaud LEGO for offering these non-System/minifig scale buildings of historic landmarks. At the same time, I do find that they are rather pricey - for the amount of small pieces contained in this and other Architecture sets.

The build isn't too fun, especially with the large number of 1x1 plates. Nothing stood out for me, aside from adding the roof which neared the completion (no more tiny pieces!)

I find it interesting that this house is white and black vs. white and grey, or other lighter color. As I said above, trans/smoked grey bricks would have made the windows look more realistic, but the finished model still looks nice. A removable roof would have added a nice feature allowing one to add coins, dollar bills, or other little secret items. As it is, the roof would be difficult to remove without causing significant damage to the walls. A printed 1x2 American flag tile or other colored tile (red or blue) would have added a nice contrasting detail rather than a 1x1 hook piece.

In regard to other aspects of this set, I think the liftable box front and black color makes a nice collectable feature. The added history on the back of the box, picture of White House, and the additional history contained within the instruction booklet adds to the overall value.

For play, this set is a zero. From a historic and collectable stand-point, the set is quite nice. For pieces, it's probably fair/average. If I were to visit the Seattle Space Needle or the White House, and find one of these Architectue sets in the gift shop, it would make an awesome souvenir/keepsake. I will most likely display this set in my living room or even my desk at work, far away from my LEGO Train Town. While I would most likely buy this set again (from a collector's/historic standpoint), I'm still not completely sold on the Architecture theme, especially the larger/more expensive sets mainly because of the price and number of small elements. They offer little to no play value, so are incompatible with existing LEGO collections - unless you have a huge miniscale city.

My final vote - it's an average to slightly above average set (based on the historic aspect). Share your thoughts.

Edited by WhiteFang
Indexed

Share this post


Link to post
Share on other sites

Thanks 'The Brickster' for this review - I think it's as good as Fallingwater. :classic:

Now just wait for the Independence Day MOC's to begin ! :devil:

I'm a conformist! ! :sweet:

Share this post


Link to post
Share on other sites

Nice review. I'm actually surprised that a set this small has 560 pieces, even though they are mostly tiny ones.

Share this post


Link to post
Share on other sites

A fine review Brickster! :wink:

A nice looking set indeed,

Though I've never cared much for Micro-scale sets, I think a UCS white house would be superb.

Share this post


Link to post
Share on other sites

It looks to me that the black 1x1 technic brick "windows" are necessary to create the 1/2 stud inset of the windows, because they have a hollow top stud. You couldn't build it the same manner with a System brick.

Share this post


Link to post
Share on other sites

Lovely review for a lovely set, great job The Brickster! The design of the White House is pretty simple but it's an ok architecture, pretty good for a lego display.

Share this post


Link to post
Share on other sites

I agree with prateek - seeing the constructed model it's almost impossible to believe that it contains 560 pieces.

I like the Architecture theme, but I'm struggling to understand why the sets are priced at such a massive premium. OK, so there are a lot of pieces in the White House, Fallingwater etc., but they're mostly tiny.

I'll no doubt pick up this set when I'm next in Chicago and can visit one of the brand stores; this set isn't even available in the UK (right now, anyway) and the price of these Architecture sets works out even greater in pounds sterling. Then I'll just have to hope it doesn't get crushed on the flight home !!

Dr. D.

Share this post


Link to post
Share on other sites

Nice review Brickster :thumbup: I was fortunate to see the unveiling of this beauty at Brickworld 2010, and whilst it is quite unique and nicely built, it isn't on my list. I agree with you on the parts usage too.

Share this post


Link to post
Share on other sites

Overall this set is nice, but there are a few flaws. As mentioned previously, they should have included a printed American flag instead of the white clip piece. I didn't care for the lightsabre blades as columns in the front, they should have used 1x1 round bricks or something a little larger, since those columns are big in real life. I wasn't impressed with the base of the building. It felt kind of flimsy if you try to move the set and often times the tiled border would come loose while picking it up. I ended up adding black plates to cover everything below the building and make it a little more stable. I believe they had to use the 1x1 bricks with holes in them because normal 1x1 bricks wont connect with the 1x2 tiles with studs in the middle which is what was used for the 16 windows. I wouldn't say this set is on par with fallingwater since with fallingwater you can remove various parts of the house and insert them back in which was really cool.

Share this post


Link to post
Share on other sites

Very nice but not worth 50 bucks for me. Thanks for the review!

Share this post


Link to post
Share on other sites

Thanks 'The Brickster' for this review - I think it's as good as Fallingwater. :classic:

Now just wait for the Independence Day MOC's to begin ! :devil:

I'm a conformist! ! :sweet:

I was thinking a 2012 MOC. A big wave with an aircraft carrier about to smash the White House. :devil:

Share this post


Link to post
Share on other sites

This is a nice review and I am glad you did this to encourage me to get this. This is very likely to be my upcoming first Architecture set. I like the iconic design even though it's down to "micro" scale, but it could be a great monument in your tabletop City. It will be a nice addition. Thanks Brickster for sharing this with us. :thumbup:

Share this post


Link to post
Share on other sites

I loved Fallingwater, but this set doesn't impress. It doesn't capture the iconic view of the building, in my opinion. Actually if I saw it without the name I'd be hard pressed to recognise it. It may be accurate architecturally but it doesn't capture the feel of imposing height which is the way we usually see it.

Share this post


Link to post
Share on other sites

Great, thorough review. But the model is underwhelming for me. Love the idea of iconic buildings made into LEGO but this looks off to me. The roof's sloped too high. The columns look too thin. Just doesn't work IMHO.

What I do like about these architect models is that they give you a history and booklet...plus great packaging...but some of the models seem a bit off from their real life counterparts. The Guggenheim comes to mind as being off and Falling Water seems that way too (even though I like the model regardless).

Maybe some of these should be made to scale or in line with the Eiffel Tower and Taj Mahal kits.

Share this post


Link to post
Share on other sites

Maybe some of these should be made to scale or in line with the Eiffel Tower and Taj Mahal kits.

With sets of those size and price, I don't think you could go through many of the retail distribution channels that the Architecture line is currently using (museums, gift shops, bookstores). It will be interesting to see how high (and large) they can go with the line. Fallingwater was a big jump from the $20 sets, but going beyond that may be challenging without fundamentally changing the entire business model.

Now that the Architecture sets are showing up in the catalog, at the LEGO stores, and are more prominently featured on the SAH website, perhaps that business model is evolving and becoming more mainstream?

Share this post


Link to post
Share on other sites

great review!! :thumbup:

actually i just picked it up at my 'not so local' Lego store at the mall... :wink: just finished building it yesterday!! :grin: it's kinda cool, although i do agree a printed flag woulda been nice, and a removable roof... :wink: i'm already thinking of how to do that... :wink:

making the 16 'windows' was definitely the monotonous part of it... :sceptic: it didn't take very long to do that, but it felt long... :sceptic: and yeah, the holed one stud brick seemed odd, at first, but then again, it's the only brick LEGO has created so far like it, that has a hollow stud top... :look:

i remember thinking the base seemed kinda flimsy for such a building, but as the model came together more, it seemed to get sturdier... a bit... :wink:

and yeah, not much in the line of 'play value' unless you stage a 'terrorist attack', but ya gotta be careful what you do with the government the way it is these days... :wink::tongue:

definitely a cool shelf model though!! :sweet:

now i'm thinking it'd be cool to have a Washington Monument, and the Lincoln Memorial, to go with it to make a 'Presidental Architectural Series' :blush: wouldn't that be cool? :sweet:

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0

  • Recently Browsing   0 members

    No registered users viewing this page.