Calabar

[KEY TOPIC] Official LEGO Sets made in LDD

4704 posts in this topic

6268 - Renegade Runner - Pirates

6268_renegade_runner.png

LXF

Missing parts replaced with custom assemblies:

6051c01 Boat Base Bow

6053c01 Boat Base Stern

2422 Bracket 2 x 2 - 1 x 4

4088 Brick 1 x 4 x 2 with Centre Stud Top

x419px3 Cloth Sail 14 x 22 Triangular with Black Thick Stripes Pattern

x716px2 Cloth Sail 17 x 24 with Jolly Roger on Black Stripes Pattern

x404c02 Minifig Compass

Strings are missing.

Unavailable decorations have been replaced or left blank.

Sails made with plates may look weird but the model looked poor without.

Share this post


Link to post
Share on other sites

65767 - Attack from the Sea - Theme: Knights Kingdom II (sets 8801 + 8802)

5265920599_1c5797791a.jpg

link

Errors:

  • All sails/flags replaced with Part # 51000
  • No decals (except for face on Rascus)
  • Part # 47576 (bricklink id) replaced with round 2x2 plate.

Edited by SpiderSpaceman

Share this post


Link to post
Share on other sites

65767 - Attack from the Sea - Theme: Knights Kingdom II (sets 8801 + 8802)

Hi! Image is a little too big: you should resize it in order to don't exceed 512x512 limit.

Share this post


Link to post
Share on other sites

Hi! Image is a little too big: you should resize it in order to don't exceed 512x512 limit.

Sorry about that. Got it fixed.

Share this post


Link to post
Share on other sites

And finally, we finish with Harry Potter and the Order of the Phoenix:

5378 Hogwarts Castle (3rd Edition) (Duplicate Set)

LXF File

Missing part bel004

Replaced part 40250cx2 with brick-built solution and x67 with x219

Replaced Bright Pink with Light Purple, Metallic Gold with Pearl Gold and Speckle Black-Silver with Titanium Metallic

Incorrect/missing prints and stickers

:sweet:

You can see the updated 2010 sets here.

Bright Pink should indeed be Light Purple. Dark pink parts, however, should be changed to Bright Purple. Medium Reddish Violet was discontinued in 2004, even if Bricklink doesn't seem to realize it. Bright Purple is its replacement.

It should be noted that the plate piece 6256 should actually be color 299 Lacquered Gold, which does not work on LDD. Warm Gold (the color you used) is a perfectly fine replacement color, and resembles the color used for it in the instruction booklet. I tend to use Sand Yellow Metallic since it's a closer match to the actual color of the piece, but really replacement colors are almost entirely a matter of preference so there's no one replacement color you should or shouldn't use.

You should also probably note that the lightning bolt piece 59233 should be blended two colors (transparent light blue and transparent bright bluish violet), and that this is not possible on LDD.

Everything else seems flawless. Great work!

Edited by Aanchir

Share this post


Link to post
Share on other sites

Hello everyone.

Since finishing the LEGO Star Wars System-Scale sets, I decided to give another theme a go. :tongue:

It is currently Harry Potter month here on Eurobricks, so to celebrate, here's the entire LEGO Harry Potter theme on Lego Digital Designer 4.0!

Great work!

Where do you get all the time to make that? :laugh:

Share this post


Link to post
Share on other sites

6268 - Renegade Runner - Pirates

LXF

Missing parts replaced with custom assemblies:

6051c01 Boat Base Bow

6053c01 Boat Base Stern

2422 Bracket 2 x 2 - 1 x 4

4088 Brick 1 x 4 x 2 with Centre Stud Top

x419px3 Cloth Sail 14 x 22 Triangular with Black Thick Stripes Pattern

x716px2 Cloth Sail 17 x 24 with Jolly Roger on Black Stripes Pattern

x404c02 Minifig Compass

Strings are missing.

Unavailable decorations have been replaced or left blank.

Sails made with plates may look weird but the model looked poor without.

I used this model for strip #201. So much was modded that I linked it back here to give marco9999 the build credit.

Share this post


Link to post
Share on other sites

Bright Pink should indeed be Light Purple. Dark pink parts, however, should be changed to Bright Purple. Medium Reddish Violet was discontinued in 2004, even if Bricklink doesn't seem to realize it. Bright Purple is its replacement.

Nor Peeron. The chart I use, lists Dark Pink as being Medium Reddish Violet, so that's what I've used in all sets.

It should be noted that the plate piece 6256 should actually be color 299 Lacquered Gold, which does not work on LDD. Warm Gold (the color you used) is a perfectly fine replacement color, and resembles the color used for it in the instruction booklet. I tend to use Sand Yellow Metallic since it's a closer match to the actual color of the piece, but really replacement colors are almost entirely a matter of preference so there's no one replacement color you should or shouldn't use.

Remember that 'plate' has a different meaning in LEGO. :grin:

Peeron doesn't have an alternative to Metallic Gold so I see I've used Pearl Gold there instead. I know I used Reddish Gold as a replacement in a different set. I'll try to at least stick to the same replacement in future.

I used Sand Yellow Metallic for both Chrome Gold and Chrome Antique Brass. I don't think I should use it in place of anymore colours!

You should also probably note that the lightning bolt piece 59233 should be blended two colors (transparent light blue and transparent bright bluish violet), and that this is not possible on LDD.

Alright, but seeing as it's not possible in LDD, and BL lists it as a trans-light blue part, I just stuck with that.

Everything else seems flawless. Great work!

Thank you very much! :sweet:

I took great care not to give you too much work! :tongue:

Great work!

Where do you get all the time to make that? :laugh:

Thanks a lot.

I don't have to spend much time in uni and I finished for Christmas two weeks ago, so I've had plenty of time to work on them! :sweet:

Share this post


Link to post
Share on other sites

Very off topic, but does anybody else notice the most recent page of this topic we are on doesn't seem to exist? *huh*

EDIT: Nevermind, the page added itself to the page before it...very weird...

Edited by CallMePie

Share this post


Link to post
Share on other sites

Index updated.

45 Sets has been added to the index (0 alternative, 11 duplicate, 1 incomplete).

Check your sets and report errors or inaccuracies!

No irregular posts this time!

Check your old irregular post and fix that!

Lists of previously reported irregular posts here, here, here, here and here.

Edited by Calabar

Share this post


Link to post
Share on other sites

Index updated.

45 Sets has been added to the index (0 alternative, 11 duplicate, 1 incomplete).

Check your sets and report errors or inaccuracies!

I knew The Durmstrang Ship would be the incomplete one. Is the hull even available in LDD? If not, I don't think it's fair to class it as incomplete.

Share this post


Link to post
Share on other sites

Set name: Motorized Excavator

Set number: 8043

Theme: technic

Parts: 1123

So after building the real deal, here is its virtual borther. There are some bugs I had to work around:

The 8 tooth gear doesnt fit there:

http://www.brickshelf.com/gallery/zblj/LDDparts/8043/bug.png

Axle 4 with stud doesnt fit in its place:

http://www.brickshelf.com/gallery/zblj/LDDparts/8043/bug2.png

And the panel had some problems fitting, so I had to left out a black pin:

http://www.brickshelf.com/gallery/zblj/LDDparts/8043/bug3.png

The new gearbox connector didnt fit all the way through (already reported bug):

http://www.brickshelf.com/gallery/zblj/LDDparts/8043/lddscreenshot34.png

And the axle 5,5 is too long, so the half bush was left out:

http://www.brickshelf.com/gallery/zblj/LDDparts/8043/lddscreenshot35.png

Besides the missing 5x7 and 5x11 frames and the showel (WHICH WAS IN LDD 3.0) the build when rather smooth and I managed to MESH ALL THE GEARS in the gearbox and align all the 8 universal joints :laugh: !

And yes the M motors were left out because of their corrupted nature.

Middle of the build:

http://www.brickshelf.com/gallery/zblj/LDDparts/8043/lddscreenshot37.png

Finished model:

lddscreenshot38.png

http://www.brickshelf.com/gallery/zblj/LDDparts/8043/lddscreenshot39.png

http://www.brickshelf.com/gallery/zblj/LDDparts/8043/lddscreenshot40.png

http://www.brickshelf.com/gallery/zblj/LDDparts/8043/lddscreenshot41.png

There may be a few pins missing, but all in all its 95% accurate!

DOWNLOAD THE LXF

NOW UPDATED TO LDD 4,1, Bucket is there and hoses bent.

Edited by Zblj

Share this post


Link to post
Share on other sites

@Zblj

The images!! :sing:

@ADHO15

Eheh, an incomplete set is not a shame! :wink:

To be complete, a set should appear "playable" and similar to the original one.

I classified incomplete every set that has an important lack not replaced with a custom solution.

For example I marked as incomplete sets without particular minifigs such as toy story ones.

I did some exception to this "rule" only when LDD4 was going to be released, because in brief many new parts would be available and the sets upgraded.

If you don't want to "mix" custom parts to official parts, you can separate that using groups. :wink:

Share this post


Link to post
Share on other sites

@BrickWild

The link of the legobar in your signature is wrong: you have to delete the character after ".png" if you want it appears in your signature.

PS: Did you read my old private messages sent to you? If you want, I'm ever waiting for an answer! :wink:

Share this post


Link to post
Share on other sites

1383 Curse of the Pharaoh - Theme: Studios

This is an LDD 4 model.

1383 Curse of the Pharaoh

Only a few substitutions in this one:

1) The spider shown as part 30328 by BL, was replaced with 30238. This is probably a BL typo.

2) The hinge plates 4276 and 2452 were replaced with 44301 and 60471.

3) The glow-in-the-dark skull inside the top of the monument is shown as white.

As usual, there are no printed pieces.

1383%20Curse%20of%20the%20Pharaoh.jpg

Peter

Share this post


Link to post
Share on other sites

Classic Space Collection

462 - Rocket Launcher

462_rocket_launcher.jpg

LXF

Decorations and old-type wheels missing.

Torso decoration fixed in 4.3.9.

Hinge Plate 3324c01 has been replaced with a template.

Picture not updated

6801 - Rocket Sled

6801.png

LXF

Slope Decoration still missing in 4.3.9.

Picture not updated

6822 - Shuttle Craft

6822.png

LXF

Not available parts 792c02 - 3612 - 4220 - 4221 have been replaced. fixed in 4.3.9.

Picture not updated

6823 - Surface Transport

6823.png

LXF

Decorations missing. Balloon wheels have been connected in a different way. Updated to 4.3.9.

Picture not updated

6874 - Moonrover

6874.png

LXF

Decorations missing.

Balloon wheels have been connected in a different way.

The wheel holders have been modified as suggested by zinfinion which is more similar to the original design even if the wheels are actually unconnected.

The fences' lattice cannot be connected. They actually can be connected in 4.3.9. but only in the central holes.

Updated to 4.3.9.

Picture not updated

889 - Radar Truck

889_-_radar_truck.png

LXF

Decorations missing and wheels replaced. Updated to 4.3.9.

Picture not updated

891 - Two-man scooter

891_two-man_scooter.jpg

LXF

Decorations missing. Wings 3935 and 3936 have been replaced. now available in 4.1.8

Updated to 4.3.9.

Picture not updated

Edited by marco9999

Share this post


Link to post
Share on other sites

A few more Futurons:

6830 - Space Patroller

6830-space-patroller.jpg

Download

One of the space robot arms cannot be placed.

6884 - AERO Module

6884-aero-module.jpg

Download

3933 Wedge, Plate 8 x 4 Wing Left replaced by 50305 Wedge, Plate 8 x 3 Left.

3934 Wedge, Plate 8 x 4 Wing Right replaced by 50304 Wedge, Plate 8 x 3 Right.

And a M:Tron:

6833 - Beacon Tracer

6833-beacon-tracer.jpg

Download

The balloon tyres could not be fitted onto the Wheel 8mm D. x 6mm.

In all three of them there are no decorations/printings, as usual.

Share this post


Link to post
Share on other sites

Set name: Motorized Excavator

Set number: 8043

Theme: technic

Parts: 1123

Besides the missing 5x7 and 5x11 frames and the showel (WHICH WAS IN LDD 3.0) the build when rather smooth and I managed to MESH ALL THE GEARS in the gearbox and align all the 8 universal joints :laugh: !

And yes the M motors were left out because of their corrupted nature.

A-mazing work Zblj. This is defintely one of the hardest models to do. I'm surprised you managed to do so much in LDD afterall.

Regarding the shovel, are you sure it was in 3.0. I've got a brick-list of all parts in 3.1, and I can't find it there.

Share this post


Link to post
Share on other sites

A-mazing work Zblj. This is defintely one of the hardest models to do. I'm surprised you managed to do so much in LDD afterall.

Regarding the shovel, are you sure it was in 3.0. I've got a brick-list of all parts in 3.1, and I can't find it there.

I could swear I saw it the first time I used LU mode. Thanks for praise!

Edited by Zblj

Share this post


Link to post
Share on other sites

Wow ADHO15, thank you for making all of those Harry Potter sets. You must have put a lot of time and effort into making them! :classic:

~buddy~

Share this post


Link to post
Share on other sites

I could swear I saw it the first time I used LU mode. Thanks for praise!

Well maybe it was in 3.0 but not 3.1? (or my datalist is all wrong)

Anyway, couldn't you brickbuild a custom shovel. Your beautiful work looks so nacked without the bucket :cry_sad:

Share this post


Link to post
Share on other sites

Sets 6823 and 6874 in post #1314 have been uploaded again after fixing some mistakes.

marco

Edited by Calabar
Inserted link to the post: number values are not absolute and can change.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.