Calabar

[KEY TOPIC] Official LEGO Sets made in LDD

4762 posts in this topic

9446 - Destiny's Bounty - Theme: Ninjago

Errors:

1) Part 4211758 does not attach to part 4514554 in two cases, technic axle substituted for latter part

2) Part 4649529 does not attach to part 4142865

3) Part 9812701 does not attach to minifig torso

4) Minifig torso does not fully attach to part 9814001

1) collision error, but from what I can tell it should actually fit, even though it's a tight fit. So LDD issue.

2) the dragons head will fit if you rotate the tow bow parts outwards (the ones with the cross-bow in them).

3) it will actually fit if you "drag" the torso down with the mouse. It's an odd case though I have to admit.

4) Known error, but good find anyway :classic:

Share this post


Link to post
Share on other sites

Index updated.

175 Sets has been added to the index (113 alternative, 13 duplicate, 0 incomplete).

Check your sets and report errors or inaccuracies in the index, if any!

1 Sets has not been added to the index because irregular.

Fix your sets in order to be added to the index!

15 new Themes added

Topic's Rules Updated.

Please read that again, new updates are marked by a tag!

New contributors

DenJansen - 3 sets

Inferno986return - 2 sets

PeabodySam - 23 sets

Zarkan - 3 sets

Instructions archiver - 1 sets

Top contributors

Gnac - 78 sets

ADHO15 - 22 sets

Sjuip - 19 sets

marco9999 - 17 sets

Costy - 15 sets

Stephan - 11 sets

PsyKater - 7 sets

DenJansen - 3 sets

List of Irregular Sets:

elmerohueso - 10213 - Shuttle Adventure - Image Oversized

bbqqq - 4000001 - LEGO Inside Tour (LIT) Exclusive 2011 Edition - Moulding Machines - Not built using official instructions

bbqqq - LIT2009 - LEGO Inside Tour (LIT) Exclusive 2009 Edition - Ole Kirk's House - Not built using official instructions

retroelectro666 - 21005 - Fallingwater - LXF missing, Image Oversized, un-highlighted set data

Gear_tooth - 21008 - Burj Khalifa - Image Oversized

Lance - 7976 - Ocean Speeder - LXF missing, Image Oversized, Image Uncropped

JunkstyleGio - 4841 - Hogwarts Express (3rd edition) - Enchanted Car only - un-highlighted set data

Bonehead74 - 6228 - Thornraxx - Details Missing, LXF missing, Image Missing

PerryMakes - 10222 - Winter Village Post Office - Image Oversized - Minifigs missing

CM4S - 9461 - The Swamp Creature - Details Missing, LXF missing, Image Missing

Instructions archiver - 6764 - Sheriff's Lock-Up - LXF Missing, Image Oversized and Uncropped.

pauldk - 483 - Alpha-1 Rocket Base - LXF missing, Image and LXF links broken

supergenius1337 - 6862 - Secret Space Voyager - Image Oversized and Uncropped, Unclear Set's data - Minifigs missing

stark mark 5 - 9488 - Elite Clone Trooper & Commando Droid Battle Pack - Image Oversized

TEH EPIC BUILDER! - 1357 - Cameraman - Set Details and Image Missing

cpt. Fist - 8856 - Whirlwind Rescue - Image Missing

merman - 8065 - Mini Container Truck - Image Oversized

elmerohueso - 8297 - Off Roader - Image Oversized, Unclear and un-highlighted set data

mikul - 6679 - Dark Shark - Image Oversized, Image not a Screenshot

Johan J - n/a - Red Factory - Idea Book #226, pag 37 - Image Missing

Share this post


Link to post
Share on other sites

3) it will actually fit if you "drag" the torso down with the mouse. It's an odd case though I have to admit.

I fiddled around with this for a bit and I still can't seem to get it to fit. Do you think you could attach an LXF with it assembled so I can add it to the model?

Share this post


Link to post
Share on other sites

I fiddled around with this for a bit and I still can't seem to get it to fit. Do you think you could attach an LXF with it assembled so I can add it to the model?

Sure, here you go

fig.lxf

Share this post


Link to post
Share on other sites

Sure, here you go

Thanks. I've updated the lxf with the corrected figure and the attached dragon head. Tomorrow, I'll be uploading 2258 Ninja Ambush, 2259 Skull Motorbike, and 2508 Blacksmith Shop. :classic:

Share this post


Link to post
Share on other sites

I don't think this one's been done yet...

3920 The Hobbit: An Unexpected Journey (LDD 4.3.5 - Games)

LXF File

the_hobbit_an_unexpected_journey2.png

ERRORS:

Incorrect/missing prints

Share this post


Link to post
Share on other sites

60018 - Cement Mixer - Theme: City / Construction (2013)

[brickset] | [bricklink]

60018.png

arrow-down-1.png LXF-File [LDD 4.3.5]

Notes:

- no stickers

- turn-element can not be attached as it can not be seperated in LDD

- wrong torso for blue worker


60017 - Flatbed Truck - Theme: City / Traffic (2013)

[brickset] | [bricklink]

60017.png

arrow-down-1.png LXF-File [LDD 4.3.5]

Notes:

- no stickers

- part (bonnet) is missing in LDD

- rope missing

Edited by PsyKater

Share this post


Link to post
Share on other sites

MISSING POSTS

Due to the EB database hickup yesterday, I notice a few posts are lost. If you can't find your post (for example Zarkan) - please repost

(sorry for this guys :blush:)

Share this post


Link to post
Share on other sites

It appears that North America already has these 2013 sets for sale in SHOPatHOME.

You lucky ducks!

----------------------------------------------------------------------------------------------------

31000 - Mini Speeder [Model A] - theme: Creator

_31000a.png

LXF (LDD 4.3)

31000 - Mini Speeder [Model B] - theme: Creator

_31000b.png

LXF (LDD 4.3)

31000 - Mini Speeder [Model C] - theme: Creator

_31000c.png

LXF (LDD 4.3)

----------------------------------------------------------------------------------------------------

31001 - Mini Skyflyers [Model A] - theme: Creator

_31001a.png

LXF (LDD 4.3)

31001 - Mini Skyflyers [Model B] - theme: Creator

_31001b.png

LXF (LDD 4.3)

31001 - Mini Skyflyers [Model C] - theme: Creator

_31001c.png

LXF (LDD 4.3)

Share this post


Link to post
Share on other sites

2258 - Ninja Ambush - Theme: Ninjago

2258_ninja_ambush.png

Errors:

Missing all print and stickers

LXF (LDD 4.3)

2259 - Skull Motorbike - Theme: Ninjago

2259_skull_motorbike.png

Errors:

Missing all prints and stickers

Part 4516456 does attach to part 4143005 inside motorcycle chassis

LXF (LDD 4.3)

2508- Blacksmith Shop - Theme: Ninjago

2508_blacksmith_shop.png

Errors:

Missing all prints and stickers

Part 4185177 does not fit in minfig hand

LXF (LDD 4.3)

Share this post


Link to post
Share on other sites

All sets UPDATED to LDD 4.3.8

70700 - Space Swarmer - Theme: Galaxy Squad

70700.png

LXF File

Errors:

All decorations are missing or incorrect

70701 - Swarm Interceptor - Theme: Galaxy Squad

70701.png

LXF File

Errors:

Some decorations and all stickers are missing or incorrect

70703 - Star Slicer - Theme: Galaxy Squad

70703.png

LXF File

Errors:

Some decorations and all stickers missing or incorrect

70704 - Star Slicer - Theme: Galaxy Squad

70704.png

LXF File

Errors:

Some decorations and all stickers are missing or incorrect

70705 - Star Slicer - Theme: Galaxy Squad

70705.png

LXF File

Errors:

Some decorations and all stickers are missing or incorrect

EDIT: Updated to LDD 4.3.8

Edited by penguinz

Share this post


Link to post
Share on other sites

2259 - Skull Motorbike - Theme: Ninjago

Errors:

Part 4516456 does attach to part 4143005 inside motorcycle chassis

It does if you fiddle around a bit :wink:

2508- Blacksmith Shop - Theme: Ninjago

Errors:

Part 4185177 does not fit in minfig hand

That was good find, because it has been possible before (if I remember correctly). Very odd.

Share this post


Link to post
Share on other sites

That was good find, because it has been possible before (if I remember correctly). Very odd.

I've never known that to be possible on LDD with any size tile. I'm surprised it's a bug that hasn't been addressed yet.

Share this post


Link to post
Share on other sites

60016 - Tanker Truck - Theme: City / Traffic (2013)

[brickset] | [bricklink]

60016.png

arrow-down-1.png LXF-File [LDD 4.3.5]

Notes:

- no stickers

- no ropen

- new part 6015344 (Brick mod 1x2 with two studs on one side) missing in LDD; replaced with 2x 87087

Edited by PsyKater

Share this post


Link to post
Share on other sites

If I may, Zarkon, I see that a lot of your Ninjago LXFs are missing minifigure decorations. However, Lord Garmadon's decorations and many of the ninjas' 2011 decorations (specifically, the gi and pants of Kai, Zane, and Cole, as well as the face of Jay) are actually available in LEGO Digital Designer, so I see no reason to not include them.

Anyways, time for another batch! This one consists entirely of sets from the Adventurers line. I was looking through this topic's index, trying to see if there were any Adventurers sets that have not yet been indexed... and there were quite a few of them. I'd thought I'd tackle as many of the smaller ones that I could (there are a few that don't seem to have any available instructions, though, so they still are not indexed), and move on to the larger sets later.

1183 - Mummy and Cart - Theme: Adventurers / Egypt
[bricklink] [brickset]

1183_mummy_and_cart.png

[1183 LXF]

Notes:
- This set was also released as 3021 King Farao Third.

Errors:
- Missing/incorrect decorations
- 30168 Minifig, Headgear Headdress Mummy with Blue and Gold Stripes Pattern is not included in LDD and has been substituted with 90462 Nemes

2541 - Adventurers Car - Theme: Adventurers / Egypt
[bricklink] [brickset]

2541_adventurers_car.png

[2541 LXF]

Errors:
- Incorrect minifigure decorations

2542 - Adventurers Aeroplane - Theme: Adventurers / Egypt
[bricklink] [brickset]

2542_adventurers_aeroplane.png

[2542 LXF]

Errors:
- Incorrect minifigure decorations
- 4859 Wedge, Plate 3 x 4 without Stud Notches is not included in LDD and has been substituted with 48183 Plate 3X4 W/Angle

5903 - Johnny Thunder and Baby T - Theme: Adventurers / Dino Island
[bricklink] [brickset]

5903_johnny_thunder_and_baby_t.png

[5903 LXF]

Notes:
- This set was also released as 1278 Jones and Baby Tyranno

Errors:
- Incorrect minifigure decorations

5904 - Microcopter - Theme: Adventurers / Dino Island
[bricklink] [brickset]

5904_microcopter.png

[5904 LXF]

Notes:
- This set was also released as 1280 Dr. Kilroy's Microcopter.

Errors:
- Incorrect decorations
- 3069 Flat Tile 1X2 cannot be placed inside 30148 Camera

5905 - Hidden Treasure - Theme: Adventurers / Amazon
[bricklink] [brickset]

5905_hidden_treasure.png

[5905 LXF]

Notes:
- This set was also released as 1271 Jungle Surprise.

Errors:
- Incorrect prints
- 30158 Rucksack W. Film Hinge cannot be properly placed on the minifigure torso
- x276 Minifig, Utensil Sun Disk is not included in LDD and has been substituted with a custom assembly
- Chrome Gold is not included in LDD and has been substituted with Warm Gold

5911 - Johnny Thunder's Plane - Theme: Adventurers / Dino Island
[bricklink] [brickset]

5911_johnny_thunder_plane.png

[5911 LXF]

Errors:
- Incorrect minifigure decorations

5912 - Mike's Swamp Boat - Theme: Adventurers / Dino Island
[bricklink] [brickset]

5912_mike_swamp_boat.png

[5912 LXF]

Errors:
- Incorrect minifigure decorations

5913 - Dr. Kilroy's Car - Theme: Adventurers / Dino Island
[bricklink] [brickset]

5913_dr_kilroy_car.png

[5913 LXF]

Errors:
- Incorrect minifigure decorations

5914 - Sam Sanister and Baby T - Theme: Adventurers / Dino Island
[bricklink] [brickset]

5914_sam_sanister_and_baby_t.png

[5914 LXF]

Errors:
- Incorrect minifigure decorations

5921 - Research Glider - Theme: Adventurers / Dino Island
[bricklink] [brickset]

5921_research_glider.png

[5921 LXF]

Errors:
- Incorrect minifigure decorations
- x66px1 Trans-Clear Plastic Triangle 6 x 12 Wing with Patched Cloth Pattern is not included in LDD

EDIT: One more for the road!

5976 - River Expedition - Theme: Adventurers / Amazon
[bricklink] [brickset]

5976_river_expedition.png

[5976 LXF]

Errors:
- Missing/incorrect decorations
- 30158 Rucksack W. Film Hinge cannot be properly placed on the minifigure torso
- 3069 Flat Tile 1X2 cannot be placed inside 30148 Camera
- 4032 Plate 2X2 cannot be attached to 30338 Palm Stem With Foot, although it has been properly placed on the model by scaffolding
- 60169 Chain 16 M bricks cannot be stretched to the two studs each one is supposed to connect to, so the ends of the chains have been moved one stud closer together to compensate
- 2623 Boat Bow Top 8 x 10 x 1 is not included in LDD and has been substituted with a custom assembly
- 14226 String 11M W. 2 Knobs is not included in LDD and has been substituted with 63141 String W. Coupl. Points 20M
- x276 Minifig, Utensil Sun Disk is not included in LDD and has been substituted with a custom assembly
- Chrome Gold is not included in LDD and has been substituted with Warm Gold
- 3334 Baseplate 16 x 24 is not included in LDD and has been substituted with a custom assembly
- bb189pb01 Minifig, Cape Cloth, Angular Points with Amazon Achu Pattern is not included in LDD and has been substituted with 56630 Special Mantle

EDIT 12/14/12: Color corrections.
EDIT 7/12/13: Updated 5905 and 5976 to LDD 4.3.6.
EDIT 12/16/13: Updated 5914 to LDD 4.3.8.
EDIT 1/31/14: Updated 1183 and 5905 to LDD 4.3.8.
EDIT 11/27/14: Updated 5976 to LDD 4.3.8, Brick Version 1564.2.
EDIT 3/15/16: Updated 1183 to LDD 4.3.9.

Edited by PeabodySam
Fixing post-update post formatting.

Share this post


Link to post
Share on other sites

If I may, Zarkon, I see that a lot of your Ninjago LXFs are missing minifigure decorations. However, Lord Garmadon's decorations and many of the ninjas' 2011 decorations (specifically, the gi and pants of Kai, Zane, and Cole, as well as the face of Jay) are actually available in LEGO Digital Designer, so I see no reason to not include them.

Huh, I guess I should have looked them over more closely. I better get to work updating them!

Share this post


Link to post
Share on other sites
EDIT: One more for the road! [...]

I suggest you to don't add sets to an already existing post, because I could not realize that a new set has been added and don't add it to the index. Make a new post, instead. This time I noticed the new set by chance.

Share this post


Link to post
Share on other sites
On 12/6/2012 at 4:54 PM, Calabar said:

I suggest you to don't add sets to an already existing post, because I could not realize that a new set has been added and don't add it to the index. Make a new post, instead. This time I noticed the new set by chance.

Got it. I was hesitant to do so, but seeing as I'm not sure if double-posting is or is not prohibited here (on some forums, it is), I got a little impatient and decided to edit my previous post instead of waiting for someone else to post first so I could make a new post (as it was, the next post wouldn't be made until about an hour and a half after I edited my post). I'll keep this in mind for the future.

5956 - Expedition Balloon - Theme: Adventurers / Amazon
[bricklink] [brickset]

5956_expedition_balloon_v2.png

[5956 LXF] (alternate LXF without brick-built Zeppelin solution)

Errors:
- Missing/incorrect decorations
- 30158 Rucksack W. Film Hinge cannot be properly placed on the minifigure torso
- 2530 Sword cannot be properly placed in 30158 Rucksack W. Film Hinge
- 2625 Stem Plate 7X6 is not included in LDD and has been substituted with 50303 Stem Plate 7X6 W/Cor.
- x276 Minifig, Utensil Sun Disk is not included in LDD and has been substituted with 88049 Triangle W. 3.2 Shaft
- Chrome Gold is not included in LDD and has been substituted with Warm Gold
- 72490c01 Container, Zeppelin / Expedition Balloon is not included in LDD and has been substituted with a custom assembly
- 30080 Panel 4 x 3 x 3 with Porthole is not included in LDD and has been substituted with a custom assembly

EDIT 12/14/12: Color correction.
EDIT 7/12/13: Updated to LDD 4.3.6.
EDIT 12/16/13: Updated to LDD 4.3.8.

Edited by PeabodySam
Fixing post-update post formatting.

Share this post


Link to post
Share on other sites

Good afternoon!

8484 Ultimate Building Lightning McQueen - Theme: Cars - LXF file

ultimate_build_lightning_mcqueen_klein.png

[Brickset][Bricklink][Peeron]

Errors:

No building errors!

Missing prints:

Medium Blue (Brick 1 x 2 with Smiling Mouth Pattern (Guido)) (Bricklink) is not in LDD, not replaced with a different decoration.

Medium Blue (Slope 65 2 x 2 x 2 with Bottom Tube with Red Eyes on White Background Pattern) (Bricklink) is not in LDD, not replaced with a different decoration.

Bright Red (Slope, Curved 4 x 2 No Studs with Smiling Mouth Left Half Pattern (L. McQueen)) (Bricklink) is not in LDD, not replaced with a different decoration.

Bright Red (Slope, Curved 4 x 2 No Studs with Smiling Mouth Right Half Pattern (L. McQueen)) (Bricklink) is not in LDD, not replaced with a different decoration.

Bright Red (Tile, Modified 4 x 4 with Studs on Edge with Eye on White Background Pattern Left) (Bricklink) is not in LDD, not replaced with a different decoration.

Bright Red (Tile, Modified 4 x 4 with Studs on Edge with Eye on White Background Pattern Right) (Bricklink) is not in LDD, not replaced with a different decoration.

Missing stickers:

Missing stickers!


8677 Ultimate Building Mater - Theme: Cars - LXF file

ultimate_build_mater_klein.png

[Brickset][Bricklink][Peeron]

Errors:

Black (String, Cord Thin 50cm) (Bricklink) missing.

Missing prints:

Reddish Brown (Tile 2 x 4 with Teeth Pattern) (Bricklink) is not in LDD, not replaced with a different decoration.

Reddish Brown (Windscreen 1 x 6 x 3 with Eyes on White Background Pattern) (Bricklink) is not in LDD, not replaced with a different decoration.

Missing stickers:

Missing stickers!

Edited by Stephan

Share this post


Link to post
Share on other sites

The name of this set reminds me of a really spicy chicken dish I had recently.

-------------------------------------------------------------------------------

31008 - Thunder Wings [Model A] - theme: Creator

_31008a.png

LXF (LDD 4.3)

31008 - Thunder Wings [Model B] - theme: Creator

_31008b.png

LXF (LDD 4.3)

31008 - Thunder Wings [Model C] - theme: Creator

_31008c.png

LXF (LDD 4.3)

Share this post


Link to post
Share on other sites

♫ 'TIIIS THE SEASON TO BE... postin' chrimble-themed LXFs

----------------------------------------------------------------------------------------------------

7220 - Snowman [Polybag] - theme: Designer

_7220.png

LXF (LDD 4.3.5)

----------------------------------------------------------------------------------------------------

7224 - Christmas Set [Polybag] - theme: Designer

_7224.png

Error:

  • Print for part 3004px20 (brick 1 x 2 with Santa Face Pattern) not available in LDD - replaced with SOME sort of face at least

LXF (LDD 4.3.5)

----------------------------------------------------------------------------------------------------

10106 - Snowflake [Polybag] - theme: Seasonal

_10106.png

LXF (LDD 4.3.5)

----------------------------------------------------------------------------------------------------

30008 - Snowman [Polybag] - theme: Creator

_30008.png

LXF (LDD 4.3.5)

----------------------------------------------------------------------------------------------------

30009 - Christmas Tree [Polybag] - theme: Creator

_30009.png

LXF (LDD 4.3.5)

----------------------------------------------------------------------------------------------------

30182 - Santa [Polybag] - theme: Creator

_30182.png

LXF (LDD 4.3.5)

----------------------------------------------------------------------------------------------------

EDIT: Wagh, fixed links

Edited by Gnac

Share this post


Link to post
Share on other sites

It does if you fiddle around a bit :wink:

I've checked the model and you're right. The problem is, for some reason the chain can't stretch as far as it does in real life. In the real life model, when the handle used to activate the skull head function is directly vertical, the chain is fairly loose and the skull head lies flat upon the bike. In LDD, it appears to be impossible to even get the lever to a completely vertical position without the skull head being partly levitated. I've attached a modified LDD file for reference.

Edited by Zarkan

Share this post


Link to post
Share on other sites

I've checked the model and you're right. The problem is, for some reason the chain can't stretch as far as it does in real life. In the real life model, when the handle used to activate the skull head function is directly vertical, the chain is fairly loose and the skull head lies flat upon the bike. In LDD, it appears to be impossible to even get the lever to a completely vertical position without the skull head being partly levitated. I've attached a modified LDD file for reference.

Yeah, I noticed that too now. It seems the chain links have small gaps between them that all add up. It's actually somewhat of "bug", since this won't allow you to use the chain as you could in a real model.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.