Calabar

[KEY TOPIC] Official LEGO Sets made in LDD

4804 posts in this topic

850486 Rock Band - Theme: (other)

850486.png

lxf-file

Errors: Wrong face, torso and leg prints

Edited by Calabar
Added theme informations

Share this post


Link to post
Share on other sites

7645 - MT61 Crystal Reaper - Theme: Space - Subtheme: Mars Mission

7645_mt61_crystal_reaper.png

lxf Updated to LDD 4.3.6.

Parts missing:

61185c01: replaced with custom brick

61680 replaced with 63965

57702 replaced with 92208

Martian figures' parts missing:

62723

62724

58845 and 58844 (available in some LDD old version) fixed in the file

Parts were replaced with custom bricks and "Life on Mars" figures' parts.

Track is not perfectly closed.

Edited by marco9999

Share this post


Link to post
Share on other sites

Super work on the index updates as usual, Mister Calabar! I know I have been responsible for a large part of the workload recently, but I'm afraid there's more.

I just can't stop!

----------------------------------------------------------------------------------------------------

4883 - Gear Grinders [Model A] - theme: Designer

_4883a.png

LXF (LDD 4.3)

4883 - Gear Grinders [Model B] - theme: Designer

_4883b.png

LXF (LDD 4.3)

4883 - Gear Grinders [Model C] - theme: Designer

_4883c.png

LXF (LDD 4.3)

4883 - Gear Grinders [Model D] - theme: Designer

_4883d.png

LXF (LDD 4.3)

4883 - Gear Grinders [Model E] - theme: Designer

_4883e.png

LXF (LDD 4.3)

4883 - Gear Grinders [Model F] - theme: Designer

_4883f.png

LXF (LDD 4.3)

4883 - Gear Grinders [Model G] - theme: Designer

_4883g.png

LXF (LDD 4.3)

4883 - Gear Grinders [Model H] - theme: Designer

_4883h.png

LXF (LDD 4.3)

4883 - Gear Grinders [Model I] - theme: Designer

_4883i.png

LXF (LDD 4.3)

4883 - Gear Grinders [Model J] - theme: Designer

_4883j.png

Note:

  • What the heck IS this thing?

LXF (LDD 4.3)

4883 - Gear Grinders [Model K] - theme: Designer

_4883k.png

LXF (LDD 4.3)

4883 - Gear Grinders [Model L] - theme: Designer

_4883l.png

Error:

  • Trailer not properly connected due to conflict between parts 4623 (plate 1 x 2 with hook) and 6091 (plate 1 x 2 with fork, vertical end)

LXF (LDD 4.3)

4883 - Gear Grinders [Model M] - theme: Designer

_4883m.png

LXF (LDD 4.3)

4883 - Gear Grinders [Model N] - theme: Designer

_4883n.png

LXF (LDD 4.3)

4883 - Gear Grinders [Model O] - theme: Designer

_4883o.png

Error:

  • Trailer cannot connect due to conflict between parts 4623 (plate 1 x 2 with hook) and 6091 (brick with arch 1 x 1 x 1)

LXF (LDD 4.3)

4883 - Gear Grinders [Model P] - theme: Designer

_4883p.png

LXF (LDD 4.3)

4883 - Gear Grinders [Model Q] - theme: Designer

_4883q.png

LXF (LDD 4.3)

Errors on ALL models, because the set has a rare part in it:

  • Part 51377 (Metallic Silver Wheel 18mm D. x 14mm Spoked) not available in LDD, replaced with part 30285

17 variations in this set, whoah.

Share this post


Link to post
Share on other sites

40042 Cat - Theme: Promotional; Monthly Mini Model Build - LXF file

cat_klein.png

[Brickset][Bricklink][Peeron]

Errors:

No errors.

40047 Owl - Theme: Promotional; Monthly Mini Model Build - LXF file

owl_klein.png

[Brickset][Bricklink][Peeron]

Errors:

No errors.

40045 Shark - Theme: Promotional; Monthly Mini Model Build - LXF file

shark_klein.png

[Brickset][Bricklink][Peeron]

Errors:

No errors.

40040 Olympic Flame - Theme: Promotional; Monthly Mini Model Build - LXF file

olympic_flame_klein.png

[Brickset][Bricklink][Peeron]

Errors:

No errors.

40044 Lawnmower - Theme: Promotional; Monthly Mini Model Build - LXF file

lawnmower_klein.png

[Brickset][Bricklink][Peeron]

Errors:

No errors.

40039 Tulip - Theme: Promotional; Monthly Mini Model Build - LXF file

tulip_klein.png

[Brickset][Bricklink][Peeron]

Errors:

No errors.

40043 Duck - Theme: Promotional; Monthly Mini Model Build - LXF file

duck_klein.png

[Brickset][Bricklink][Peeron]

Errors:

No errors.

40038 Worm & Earth - Theme: Promotional; Monthly Mini Model Build - LXF file

worm_and_earth_klein.png

[Brickset][Bricklink][Peeron]

Errors:

No errors.

40037 Hockey Player - Theme: Promotional; Monthly Mini Model Build - LXF file

hockey_player_klein.png

[Brickset][Bricklink][Peeron]

Errors:

No errors.

Share this post


Link to post
Share on other sites

@Stephan; your images aren't working. I don't know what's the poblem, it seems you deeplinked them correctly. Although the folder is still not public, the images should work :sceptic:

Any ideas?

Share this post


Link to post
Share on other sites

@legolijntje: I know, I fixed that. This time I decided to upload my post first with all the links and after that upload them to Brickshelf. That's why :)

Share this post


Link to post
Share on other sites

7646 - ETX Alien Infiltrator - Theme: Space - Subtheme: Mars Mission

7646_etx_alien_infiltrator.png

7646_etx__alien_infiltrator.lxf Updated to LDD 4.3.6.

Parts missing:

61185c01: replaced with custom brick

61680 replaced with 63965

Martian figures' parts missing:

62723

62724

58845 and 58844, replaced with custom bricks and "Life on Mars" figures' parts. Fixed in the file.

Missing all stickers and some decorations

7647 - MX-41 Switch Fighter - Theme: Space - Subtheme: Mars Mission

7647_mx-41_switch_fighter_o.png

Open configuration (see picture): o lxf

Closed configuration: c lxf Updated to LDD 4.3.6.

Martian figures' parts missing:

58845, 58844 and 58843, replaced with custom bricks and "Life on Mars" figures' parts.

Tube End 58947 in LDD is slightly different from the part shown in the instructions and in Bricklink's picture, although they refer to the same id#.

The LDD part has 6 holes on each side, the Bricklink part has 5. Not a dramatic difference, but it causes a minor incoherence with the original design.

Missing all stickers and some decorations

Edited by marco9999

Share this post


Link to post
Share on other sites

Sea Machines? Do Machines!

----------------------------------------------------------------------------------------------------

4505 - Sea Machines [Model A] - theme: Designer

_4505a.png

LXF (LDD 4.3)

4505 - Sea Machines [Model B] - theme: Designer

_4505b.png

LXF (LDD 4.3)

4505 - Sea Machines [Model C] - theme: Designer

_4505c.png

LXF (LDD 4.3)

4505 - Sea Machines [Model D] - theme: Designer

_4505d.png

LXF (LDD 4.3)

4505 - Sea Machines [Model E] - theme: Designer

_4505e.png

LXF (LDD 4.3)

4505 - Sea Machines [Model F] - theme: Designer

_4505f.png

LXF (LDD 4.3)

Share this post


Link to post
Share on other sites

7015 - Viking Warrior challenges the Fenris Wolf - Theme: Vikings

...

  • Part 32310 won't attach to the wolf in the correct place.

It is actually possible to place part 32310 on the back of the wolf if you take advantage of a small gap between the axle and the lever. Remove 4519, 43857, 43093 and 2780 from the back of the wolf, then connect 32310 to 2M levers 41677 by means of a bar, for example 30374. Then set a 1 degree anticlockwise rotation for 32310, remove the bar and all other parts will fit.

If it can help here is the fixed file: 7015_fix.lxf

Share this post


Link to post
Share on other sites

7994 - LEGO City Harbour - Theme: City / Harbour

[bricklink] [brickset]

7994_harbour.jpg

7994 LXF

Notes:

- Ship 72x4x18, Assembled (Design ID 59278) not in LDD (appears only in this set sofar). Replaced by custom build ship's hull. :pir-sick:

- No strings for crane, anchor and fishing rod

- Different minifig body decoration for ship's captain

- Truck: Red Technic Brick 1x1 placed aside due to illegal build in truck cabin (supposed to be between two Brick 1x1 with Four Knobs 4733) :angry:

EDIT: Ship's hull corrected with LDD 4.3.8/1264. Placement of Red Technic Brick 1x1 corrected with LDD 4.3.9/2075

Edited by Sjuip

Share this post


Link to post
Share on other sites

BIG DAMN TRUCK.

----------------------------------------------------------------------------------------------------

5563 - Racing Truck [Model A] - theme: Model Team

_5563a.png

Errors:

  • No stickers
  • Possible collision error with 6592 (Toothed Bar 10M) - connector pegs won't fully insert, but still just about connect
  • Steering feature not operational due to LDD limitations
  • Flexible hoses 78c06 (Black Hose, Ribbed 7mm D. 6L) not available in LDD
  • Print for part 3039px6 (Black Slope 45 2 x 2 with 3 Gauges and 3 Knobs Pattern) not available in LDD
  • Bull bars part 71972 (Chrome Silver Vehicle Grille Guard) not available in LDD, replaced with brick-built solution
  • Doors 30073 (White Door 1 x 6 x 8 Left) and 30074 (White Door 1 x 6 x 8 Right) not available in LDD, replaced with brick-built solution (which also mimics the missing stickers)
  • Rim part 32004b (Light Gray Wheel 68.8 x 24 Model Team Type 2) missing in LDD, replaced with part 88652 (Rim 43.2 x 18)
  • Road tyre part 32003 (Black Tire 68.8 x 24) missing in LDD, replaced with part 32019 (Tyre 62.4 x 20)

LXF (LDD 4.3)

5563 - Racing Truck [Model B] - theme: Model Team

_5563b.png

Errors:

  • No stickers
  • Possible collision error with 6592 (Toothed Bar 10M) - connector pegs won't fully insert, but still just about connect
  • Steering feature not operational due to LDD limitations
  • Print for part 3039px6 (Black Slope 45 2 x 2 with 3 Gauges and 3 Knobs Pattern) not available in LDD
  • Part 32062 (Axle 2M with groove) cannot be inserted into 71075* (Tube with knob 1 2/3) - the axle has been left underneath the model
  • Rim part 32004b (Light Gray Wheel 68.8 x 24 Model Team Type 2) missing in LDD, replaced with part 88652 (Rim 43.2 x 18)
  • Road tyre part 32003 (Black Tire 68.8 x 24) missing in LDD, replaced with part 32019 (Tyre 62.4 x 20)

LXF (LDD 4.3)

* BrickLink and LDD seem to disagree over which parts are referenced by 71705 and 71706

EDIT 20121104: Fixed the issues with the steering system, where the rack could not fully connect to the steering knuckle

EDIT 20121105: Fixed link to the A Model. Sorry about that!

Edited by Gnac

Share this post


Link to post
Share on other sites

7648 - MT-21 Mobile Mining Unit - Theme: Space - Subtheme: Mars Mission

7648_mt-21_mobile_mining_unit.png

lxf

Errors:

- martian figure non in LDD

- round signs 30261 are correctly placed but not connected

- a couple of wheels 6118 won't connect to the vehicle. The reason for that is the wrong positioning of brick 6249's pin inside the wheel (it goes too deep inside) so the wheel gets too near to the vehicle and collides with the slope brick. The same bug occurs to any Technic pin connecting to 6118.

- Missing all stickers and some decorations.

Edited by marco9999

Share this post


Link to post
Share on other sites

@Petersky

You have to post every set separately, and with one image for each.

Can you edit your post?

EDIT: thanks!

Share this post


Link to post
Share on other sites

All the models in this post, with the exception of the last one (6037 Witch's Windship), are alternate models to previously-indexed Adventurers sets. As such, the A Models are not listed.

5925 - Pontoon Plane (B Model: "Adventurer Hovercraft") - Theme: Adventurers / Amazon

[bricklink] [brickset]

5925_adventurer_hovercraft.png

5925 LXF

Notes:

- The Adventurer Hovercraft is an inspiration model provided on the back of the instructions for 5925 Pontoon Plane. Instructions for the Adventurer Hovercraft are not included in 5925 Pontoon Plane itself, but have been provided in the January-February 1999 issue of LEGO Mania magazine.

- In the inspiration model photo and the final step of the instructions, the two 2412 Radiator Grille 1x2 bricks placed on the red 3022 Plate 2x2 brick are colored black. However, in Step 6 of the instructions, they are colored light gray. For this LXF, the light gray color is used, but either color is possible when using the inventory of 5925 Pontoon Plane.

Errors:

- Incorrect minifigure decorations

- 6069 Wedge 4 x 4 Triple without Stud Notches is not included in LDD and has been substituted with 48933 Roof Tile 4x2/18 W/Cor.

- 4859 Wing 3 x 4 with 1 x 2 Cutout without Stud Notches is not included in LDD and has been substituted with 48183 Plate 3x4 W/Angle

- 30010 Wall Element 1X2X1 - Tr. has been substituted with 4865 Wall Element 1X2X1

- 30057 Plate 1X1 Round has been substituted with 6141 Plate 1X1 Round

5935 - Island Hopper (B Model) - Theme: Adventurers / Dino Island

[bricklink] [brickset]

5935_island_hopper_alternate.png

5935 LXF

Errors:

- Incorrect minifigure decorations

- 4733 Brick 1x1 W. 4 Knobs cannot attach properly to 2458 Brick 1x2 W. Horizontal Snap, as this is most likely an illegal building technique. As such, while the brick is correctly placed on the model using scaffolding, it is not attached to the rest of the model.

- 2625 Stem Plate 7X6 is not included in LDD and has been substituted with 50303 Stem Plate 7x6 W/Cor.

- 30057 Plate 1X1 Round has been substituted with 6141 Plate 1X1 Round

5935 - Island Hopper (C Model: "HelioRaptor") - Theme: Adventurers / Dino Island

[bricklink] [brickset]

5935_helioraptor.png

5935 LXF

Notes:

- The HelioRaptor is an inspiration model provided on the back of the instructions for 5935 Island Hopper. Instructions for the HelioRaptor are not included in 5935 Island Hopper itself, but have been provided in the November-December 2000 issue of LEGO Mania magazine (pages 18 and 19).

Errors:

- Incorrect minifigure decorations

- 4733 Brick 1x1 W. 4 Knobs cannot attach properly to 2458 Brick 1x2 W. Horizontal Snap, as this is most likely an illegal building technique. As such, while the brick is correctly placed on the model using scaffolding, it is not attached to the rest of the model.

- 2625 Stem Plate 7X6 is not included in LDD and has been substituted with 50303 Stem Plate 7x6 W/Cor.

- 30057 Plate 1X1 Round has been substituted with 6141 Plate 1X1 Round

5987 - Dino Research Compound (B Model) - Theme: Adventurers / Dino Island

[bricklink] [brickset]

5987_dino_research_compound_model_b.png

5987 LXF

Notes:

- The three alternate models for 5987 Dino Research Compound can be built simultaneously.

Errors:

- Incorrect minifigure decorations

- 6069 Wedge 4 x 4 Triple without Stud Notches is not included in LDD and has been substituted with 48933 Roof Tile 4x2/18 W/Cor.

- 4859 Wing 3 x 4 with 1 x 2 Cutout without Stud Notches is not included in LDD and has been substituted with 48183 Plate 3x4 W/Angle

- 30057 Plate 1X1 Round has been substituted with 6141 Plate 1X1 Round

5987 - Dino Research Compound (C Model) - Theme: Adventurers / Dino Island

[bricklink] [brickset]

5987_dino_research_compound_model_c.png

5987 LXF

Notes:

- The three alternate models for 5987 Dino Research Compound can be built simultaneously.

Errors:

- 30057 Plate 1X1 Round has been substituted with 6141 Plate 1X1 Round

5987 - Dino Research Compound (D Model) - Theme: Adventurers / Dino Island

[bricklink] [brickset]

5987_dino_research_compound_model_d.png

5987 LXF

Notes:

- The three alternate models for 5987 Dino Research Compound can be built simultaneously.

Errors:

- None!

6037 - Witch's Windship - Theme: Castle / Fright Knights

[bricklink] [brickset]

6037_witch_airship.png

6037 LXF

Errors:

- Missing/incorrect minifigure decorations

- x83px1 Minifig Accessory Cape Cloth with Scalloped Edge and Dull Corners and Spider Pattern is not included in LDD and has been substituted with 56630 Special Mantle.

EDIT 3/7/13: Updated 5987 C Model to LDD 4.3.6.

EDIT 3/26/13: 5987 C Model bug fix.

EDIT 7/12/13: Updated 5935 B Model to LDD 4.3.6.

EDIT 12/16/13: Updated 5935 B Model and C Model to LDD 4.3.8.

EDIT 1/31/14: Updated 6037 to LDD 4.3.8.

Edited by PeabodySam

Share this post


Link to post
Share on other sites

@PeabodySam

Looking at set 5987, are you sure that such a small builds are official alternative models?

Perhaps are these part of a single "alternative model?"

Look at the upper part of the last page of the instruction booklet.

Share this post


Link to post
Share on other sites

@PeabodySam

Looking at set 5987, are you sure that such a small builds are official alternative models?

Perhaps are these part of a single "alternative model?"

Look at the upper part of the last page of the instruction booklet.

Technically, all three alternate models can be built at the same time using only the pieces of 5987, as emphasized by a photo on the back cover where all three models are shown together (along with a couple of inspiration models with no known building instructions). Would it be preferable, in this case, to combine the three models into a single LXF file?

Share this post


Link to post
Share on other sites

@PeabodySam

Perhaps the best thing would be to create the whole scenario showed in the photo on the back cover.

Do you think you can do that?

Share this post


Link to post
Share on other sites

@PeabodySam

Perhaps the best thing would be to create the whole scenario showed in the photo on the back cover.

Do you think you can do that?

I admit, it is a little pet project of mine that I've been working on, but the issue with this is that, with the exception of the three models provided in my above post, none of the models in the photo have any known instructions and are merely inspiration models. The truck, which is more-or-less completely assembled as seen in the picture I just linked to, is included in LEGO Racers 2's car builder, but LEGO Racers 2 takes some liberties with the truck's design (for example, it uses more white bricks than actually available in 5987) and the chassis is pre-built, meaning that there are not even complete instructions for that. On top of that, all scans of that photo that I can find on the internet (even on LEGO.com's official PDF file) are too grainy and low-res to be absolutely sure of everything in the model. But, unfortunately, even if you were to give me the clearest possible photo straight from the LEGO vault and even pull out the original inspiration models designed by the set designers and hand them to me, there's one major flaw with all of this:

Set have to be constructed using official LEGO instructions and not interpreting preliminary or official images.

Unfortunately, aside from the three models with provided instructions, to recreate the entire scenario featuring these three models would require a lot of interpretation of a single official image, and that's forbidden by the second rule of this topic.

As I said, recreating the inspiration models in the photo is a little pet project of mine, so to answer your actual question, yes: I do think it's within the realm of possibility that I can do it. However, I don't think that said pet project is fit for being indexed in this topic due to the amount of interpretation that is required by this task. Since the three models which I posted do have official instructions and can be built simultaneously, would you prefer that I combine the three LXF files into a single file, or would you prefer keeping them separate?

Share this post


Link to post
Share on other sites

@PeabodySam

You are right.

I gave only a look at the image and I thought that other models are those specified in the built instructions.

I've to discuss about this situation with other of the staff.

For now leave the post as is then, and add a note that models B, C and D can be built together.

Share this post


Link to post
Share on other sites

7690 - MB-01 Eagle Command Base - Theme: Space - Subtheme: Mars Mission

7690_mb-01_eagle_command_base.png

lxf

ERRORS:

Parts not in LDD replaced with custom bricks:

30585b

58843, 58844 and 58845

x153

30584c01

47122

1x1 round plate is not connected to tube end 58947 in the white spaceship

dart 58842 cannot be 2-coloured

Missing stickers, rubber belts and proper decorations.

7691 - ETX Alien Mothership Assault - Theme: Space - Subtheme: Mars Mission

7691_etx_alien_mothership_assault.png

lxf

ERRORS:

Parts not in LDD replaced with custom bricks:

30585b

58844 and 58845

x153

30584c01

dart 58842 cannot be 2-coloured

Missing stickers, rubber belts and proper decorations.

Edited by marco9999

Share this post


Link to post
Share on other sites

It is actually possible to place part 32310 on the back of the wolf if you take advantage of a small gap between the axle and the lever. Remove 4519, 43857, 43093 and 2780 from the back of the wolf, then connect 32310 to 2M levers 41677 by means of a bar, for example 30374. Then set a 1 degree anticlockwise rotation for 32310, remove the bar and all other parts will fit.

If it can help here is the fixed file: 7015_fix.lxf

That was a nice workaround :classic:

(In the meantime I reported the initial bug to TLG).

Share this post


Link to post
Share on other sites

Errors:

- 4733 Brick 1x1 W. 4 Knobs cannot attach properly to 2458 Brick 1x2 W. Horizontal Snap, as this is most likely an illegal building technique. As such, while the brick is correctly placed on the model using scaffolding, it is not attached to the rest of the model.

This is a tricky one in terms of illegal technique. From what I have learned it is not an illegal technique in the respect that there is constant compression on any part of the elemenets (the flanges of the 2458 fits inside the cavity of 4733). On the other hand it is not a "designed" connection, but a loose one, and therefore not supported in LDD. I'm not sure what to think myself of this one.

Share this post


Link to post
Share on other sites

This is a tricky one in terms of illegal technique. From what I have learned it is not an illegal technique in the respect that there is constant compression on any part of the elemenets (the flanges of the 2458 fits inside the cavity of 4733). On the other hand it is not a "designed" connection, but a loose one, and therefore not supported in LDD. I'm not sure what to think myself of this one.

I agree, Superkalle. It's not designed, but creative and is used quite often and for some time now. I myself have come across several times, for example in the posted sets 4556 Train Station (turnstile) and recently in 7994 LEGO City Harbour (navigation radar on port side of the ship's bridge roof).

Share this post


Link to post
Share on other sites

7994 LXF

- Truck: Red Technic Brick 1x1 placed aside due to illegal build in truck cabin (supposed to be between two Brick 1x1 with Four Knobs 4733) :angry:

I actually got the red brick to fit. Just pick it up, and place it, and it will snap. Normally it's an illegal build, but sometimes you can make it snap in LDD; and this is such a case.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.