Jim

[REVIEW] 42070 - 6x6 All Terrain Tow Truck

42070 - 6x6 All Terrain Tow Truck - Rating  

211 members have voted

  1. 1. How do you rate this set?



Recommended Posts

15624317003_e8eb01e330.jpg

REVIEW - 42070 - 6X6 ALL TERRAIN TOW TRUCK

35143851003_36871e9f00_c.jpg

INTRODUCTION

It is that time of year again. The time when the most interesting new Technic sets will be (or already have been, in some cases) released. The flagship set is obviously builds loads of anticipation and expectancy. Interesting enough this year's flagship set isn't the biggest set, when we are merely regarding the number of parts. Even though the 42069 has more parts, this set is still considered to be the flagship. It's quite obvious when you see the size of the box or when you look at the price.

At first sight the set looks as impressive as the box. Six big wheels, introduced in the Claas last year. Full RC, which means you can use a remote to drive the vehicle and to operate the crane and outriggers. There is only one remote however, so the functions need to be switched, using gears and levers. I am anxious to find out how the gear box works.

Since several videos and reviews have been released, we already know that this set received a lot of criticism. One of the main complaints is the hefty price tag. It's as expensive as the Bucket Wheel Excavator, yet is has less than half the parts. There must be something in this set justifying the price tag. Why don't we start building, so we can find out what that might be.

PICTURES

Pictures can be clicked to view hi-res versions. More pictures can be found in my Flickr album.

DISCLAIMER

This set has been provided by the CEE Team of TLG. It's not my goal to promote this set. It's my goal to give you an honest opinion about it. Therefore, the opinion in this review is my own and is in no way linked to TLG.

SET INFORMATION

Number: 42070 
Title: 6x6 All Terrain Tow Truck 
Theme: Technic
Released: 2017
Part Count: 1862
Box Weight: 4,0 kg (approx)
Box Dimensions: 58,0 cm x 47,7 cm x 11,9 cm
Set Price (MSRP): € 279
Price per Part: € 0,15 
Links: BricksetBricklink

THE BOX

Upon looking at the box, it's clear that this set is this year's flagship. Obviously the lid/flap is a clear indication that we're dealing with the flagship, but the box itself is also pretty impressive.

35536453640_638dff23c7_c.jpg

INSIDE FLAP

The inside of the flap shows a single picture of the model, with the outriggers extended. Admittedly, it does look cool and appealing. According to the designers this is the truck that will tow the truck that was supposed to tow your car. If this bad boy doesn't get the job done, what will?!

35754801672_ecc94e6747_c.jpg

INSIDE

The inside of the box shows the different functions, translated in no less than eight languages. At the bottom you can see an overview of all the Power Functions components.

35536453980_674bca7440_c.jpg

BACKSIDE

The backside of the box also shows some of the functions, together with the B-model, a Research Explorer Vehicle. Not that I am particularly familiar with research vehicles, but it doesn't resemble anything I have ever seen :laugh:

35754802282_8f5053066b_c.jpg

CONTENTS OF THE BOX

The box contains:

  • 1 Single book with stickers
  • 6 Tires
  • 18 Bags

BOOK WITH STICKERS

The way every bigger Technic (or LEGO set in general for that matter) should be packed, the sticker sheet combined with the book. 

35754828942_ffbf576c2c_c.jpg

BOOK

The book is quite heavy and it contains almost 400 pages for 590 building steps.

35754829592_a1b059c2ea_c.jpg

STICKER SHEET

Since the sticker sheet is packed with the book, it's unharmed during transit. Hopefully the bear is unharmed too. The colors of the stickers are very vibrant, which perfectly match the Dark Azure look of the truck itself.

35924919115_f9112fab61_c.jpg

TIRES

One of the key elements of this set are the six big tires, introduced in the Claas in 2016. I am big fan of these tires, so I was delighted that the rumors about a 6x6 Truck with Claas tires were true.

35754829772_852c7eff4a_c.jpg

BAGS

This set contains 18 unnumbered bags, containing a total of 1862 parts. The PF components are combined with the rims and are packed in two separate bags. By looking at the bags you can already see a lot of different bright colors.

35085099654_a646053911_m.jpg35085099754_3a288984e0_m.jpg35085099844_4d146202dc_m.jpg

35884073316_e6348ab86a_m.jpg35085099984_83de22a686_m.jpg35884072286_4d71398dd6_m.jpg

35884073526_861808bee3_m.jpg35085100084_b034a089e2_m.jpg35884073696_03b953528a_m.jpg

35754831042_4ecbe5a0cf_m.jpg35754831312_7780403ac6_m.jpg35754829132_95bf8534d8_m.jpg

35884073986_4bb071b1eb_m.jpg35754831542_0935fd46b7_m.jpg35884074066_00e6d7d8c0_m.jpg

35754831802_7ecedcc61d_m.jpg35884074276_6038bed384_m.jpg35924918755_bf5ce70bd6_m.jpg

HIGHLIGHTED PARTS

This section describes the interesting parts.

POWER FUNCTIONS

This set contains the following Power Functions elements:

  • Battery Box
  • Infrared Receiver
  • Infrared Remote Control
  • M Motor
  • XL Motor

Compared to the Bucket Wheel Excavator this set does have the IR Receiver and Transmitter, while the BWE doesn't. And it has an M Motor, which the BWE lacks. So it has three more PF components. This is important for comparing the price. It's a nice PF Starter Pack for those of you getting (back) into the hobby.

35085099154_f8a4daf361_c.jpg

24-16 TEETH DIFFERENTIAL

Surprisingly, this set contains two old style Differentials. Upon close inspection, it seems that the mold has changed a bit, since the innards of the gear slightly protrudes, which wasn't the case with the previous versions. Admittedly, I would probably not have noticed if Sariel hadn't mentioned it. 

Actually it makes sense that this set contains at least one of these differentials. Since it's full RC and 6x6 we do need a center differential to prevent strain on the axles when powering all the wheels.

35085100564_a74ff17eb1_n.jpg

DARK BLUE AZURE PARTS

When we first saw the pictures of this set, we had to guess which color blue was used. This is because TLG has treated us with a wide range of blue elements in the Technic line. Compared to medium blue or medium azure, I definitely prefer this blue color. It would be great if TLG picked one (or two) shade(s) of blue and worked with that for a while though. They probably have heard enough complaints by now, so hopefully they will stick to dark azure as the alternate blue.

Downside of getting new colors is the range of available parts. Over time the inventory will hopefully grow, but for now we have to work with this selection of dark azure. Currently there are 215 registered parts in dark azure, but they won't be very useful for building Technic. Unless you like to add Duplo to your truck :wink:

  • 4x Liftarm 2x4
  • 13x Liftarm 5L
  • 13x Liftarm 11L
  • 1x #1 and #2 Panel
  • 1x #13 and #14 Panel
  • 6x Curved Panel 11x3
  • 3x Panel 11x3
  • 9x Panel 11x5
  • 4x Tapered Panel 11x5 

35884074426_1f9c597328_c.jpg

CURVED PANEL 13x3

For the first time we get these panels in black, which is a very welcome addition to the parts selection. If we can get them in white too, that would be great, thanks :thumbup:

35754832082_8de5caae83_c.jpg

CURVED PANEL 3x6x3

Earlier this year this transparent version of the curved 3x6x6 panel was intruced in the BMW R 1200 GS and Uwe conveniently used it as headlights in this truck.

35884074586_d7627613e3_n.jpg

DOG BONE

For the first time one of the frames (technically it's called a liftarm) is produced in a different color than light bluish grey. Six H Shaped Liftarms in red will be used in this set. One of my favorite parts and they perfectly fit the Mindstorms EV3 color palette.

35754832202_ea8a0bbc3c_c.jpg

AXLE AND PIN CONNECTOR HUB

This year the Axle and Pin Connector Hub is released in red. I already found these at the Factory Store in Legoland Germany and I wondered which set would use these in red. They are most likely not produced in red for this set, but for Baze Malbus from the Star Wars Buildable Figures.

35143851083_b7cd0230c6_n.jpg

ROPE

This set contains a new rope. It has kind of a metallic touch to it. It is slightly ticker than the regular rope. Thumbs up for this new version. It looks and feels a lot better.

35143851203_9b545ff730_n.jpg

RED #3 CONNECTOR

Last but not least, the rerelease of the red #3 connector, last seen in 2011. Lots of MOC-ers will be very happy to be able to use these parts for an affordable price again. I almost forgot that these parts were pretty rare, so I shot this picture afterwards. Four parts is exactly the number I have (or had before now) in my collection. So basically I doubled up! Whoop whoop.

35787626022_7337a50e20_n.jpg

INVENTORY

This set contains 1862 parts, which is not that many for a flagship these days.

35085077264_3e30762b31_n.jpg 35115671433_9818293060_n.jpg

THE BUILD

Let's build ourselves a 6x6 All Terrain Tow Truck, now shall we! As with most trucks we start by building the center section, where the gearbox will be positioned. We immediately get cracking with quite a few gears, including the white safety gear (a.k.a. Clutch Gear).

35754829422_cb4182895d_c.jpg

Early on the M Motor is attached to the gear box. This motor will be used to drive several functions, switched manually by two levers.

35793020231_8de5caae83_c.jpg

This picture clearly shows that there are four switches to be operated. Eventually there are only two levers (one on each side of the vehicle), so let's wait and see how this will end up. So far the build is enjoyable. It's fun to add the gears and to slowly find out how they will be operated and which function(s) they will be driving. 

35754832382_c2c8630bc6_c.jpg

After building most of the center gearbox you will work your way forward and attach the front wheel steering linkage. As you can see the steering is operated off center and the second 12T Bevel Gear is only used to guide the rack.

One of the things that also meets the eye is the different colored liftarms on the port and starboard side of the boat...uhmm truck. It seems odd at the moment, but it will prove to be useful later on...if you don't screw up anyway :laugh:

35884074926_29791e29ab_c.jpg

Talking about screw ups. I had quite a few of 'em during the build. It was late and I wasn't really sharp. An example of lack of sharpness is taking the XL Motor to the photo studio (I was building downstairs) and not thinking clearly about where the cable should be positioned. I can tell you...not this way. There is little extra length on the cable, so you will need every centimeter (or even milimeter). Connecting it this way will end up with having too little length on the cable. Lucky for me I was able to turn the motor around without taking too much of the model apart.

35085101134_180eda7b08_c.jpg

I had a friend over who is interested in LEGO Technic as well. Obviously, he didn't want to be in spectactor mode during the entire build, so we alternated building every now and then. Since I misplaced the XL Motor, you can see what happened in the picture below. The dark azure liftarms were placed over the wire, which got us into trouble half an hour later or so.

35884075116_0f4053307e_c.jpg

Let's talk a bit more about the different colors on the different sides of the truck. Since people tend to frequently make the mistake of misplacing the differentials in a 4x4 model, TLG provided a fool proof way of connecting the differentials. This way you almost cannot make this mistake. So, you would think. Unless you are building with a team mate and you incorrectly correct a mistake. That is exactly what happened during this phase of the build.

My buddy had built both live axles. He had built them correctly, but he reversed the second one, resulting in the red liftarms being on the wrong side of the vehicle. I noticed the mistake, but instead of simply turning the second live axle around, I started rebuilding the second live axle. This resulted in both differentials being on the same side. Needless to say, that didn't improve driving performance.

35754833252_fc573848f6_c.jpg

This was the moment that we called it a night. As you can see the wire is still incorrectly attached and the rear live axle has an incorrectly placed differential. Little did we know that we *cough* my buddy *cough* also missed a 20T bevel gear right smack in the middle of gearbox.

35782809692_0cc0695199_c.jpg

As you can see in the picture below, there is no extra length on the cable of the XL Motor. This is not the most elegant solution, but after you finish the cabin, you won't see the cable anymore.

35113266914_826b7e7c0f_c.jpg

At this point we still had the rear differential the other way around, so when I hooked up the battery box to test all the functions, we noticed the two rear axles turning in different ways...a clear indication you screwed up. I immediately realised that my buddy didn't screw up the build, but simple attached the rear axle incorrectly (or is this also considered a screw up hehe). We both had a laugh and fixed the mistake.

35143851113_8fc282f4ec_c.jpg

Here you can see that the red connector is a tight fit. Not much margin to work with.

35143851313_b944bda683_c.jpg

The finished cabin looks cool. Although, I wonder why TLG keeps using blue panels as seats. I mean, this blue doesn't really match the rest of the truck. I'd say that any other color would have worked better than blue. Yellow would have been okay, or simply dark or light bluish grey, since the set is already very colorful. Come on guys, you can do better than that.

35113267064_e667e5c28f_c.jpg

The engine powering this behemoth is a powerful 4 cylinder engine. Wait a minute?! That can't be right. A 4 cylinder engine....hmmmph. I reckon its real life counterpart wouldn't use a 4 cylinder engine, but Uwe probably prefered a non-V engine over the correct number of cylinders. I would rather see a big 8 cylinder engine, even if that meant a V8. Even Dokludi used a V8 in his replica, so there is space enough. Other than that; the engine with the two black panels looks cool.

35145676803_e18f785221_c.jpg

The rear outriggers use more or less the same mechanism as the side ones, using an axle instead of gears to operate the stamps. Cool aspect about this technique is that it's quite rare for the outriggers to be operated by a motor. Usually you have to manually extend the stamps, which is rather cumbersome. Or be very patient when you have to wait for the 42009 outriggers to be extended. These outriggers are deployed in no time!

35143851503_7232fbd809_c.jpg

Here's the attachment of the gearbox to the mini LA. The axle still needs to be pushed through the bracket.

35143850863_1f12ea341c_c.jpg

When you are done with the rear outriggers you move onto the crane. The crane looks rather flimsy for a truck this robust. Some panels could be added to make it look more sturdy and robust. It feels unfinished this way.

At this point the model looks like you will be adding quite some stuff. On the contrary, you are almost done at this point. I remember my girlfriend looking at the parts I had left, looking at the model and saying "but you still need to build a lot". This is how your 98% complete truck looks like.

35113267144_0307f4c42f_c.jpg

The fenders and the side panels cover up the chassis and after that you are done. As you can see, the rear of the truck lacks a proper bed, which leaves you with an unfinished feeling, again. The rear and (the looks of the) crane are definitely not the strong suit of this model.

35113267554_eae16c0246_c.jpg

The front of the model does look cool though. Unlike the cute bear, the front says "don't mess with me, I will ... you up". At the bottom you can see the 40 year anniversary brick (3L Liftarm), which is present in all of the 2017 sets.

Several "Tow 067" stickers need to be applied, but what they mean still remains a mystery. Since set 42067 is missing from the line-up many of us figured the 42067 would be introduced as a new supercar (or something similar) being towed by this truck. The designers were actually quite surprised with this theory (or they acted surprised) and they said it wasn't related at all. It is supposed to have a meaning though, which we will find out later. 

35913944856_8bc81c0eab_c.jpg

FINISHED MODEL

Without further ado, I hereby present this year's flagship.....the 42070 6x6 All Terrain Tow Truck! Some basic observations when looking at the model. I didn't like the color at all when it was first presented. During the build I actually started liking Dark Azure. It works really well with red and the yellow details.

There is quite a gap underneath the doors. It's a plus that TLG included the bigger panels, but I can't help but think that the gap could have been avoided. The yellow rims with the black dishes work really well.

The overall look of the truck is rather impressive. When you start building and you see the six big tires, it's a sign that it's gonna be "yuge". And that the Mexicans are going to pay for it...oh wait now, that's something totally different. It is huge though. I am well aware that bigger doesn't always mean better, but I am a sucker for big models.

35113267224_ac24c8817b_c.jpg

The front of the truck with the bull bar definitely matches my expectations for this kind of truck. The chains and the Teddy Bear add nice touches to the exterior.

35143851933_c23d3e84ef_c.jpg

The center of the chassis seems to be bending a bit, which isn't really surprising, given the size of the model. When I go on a cruise, the ship is bending all the time and that's not even a bad thing. I don't really mind this model bending a bit, although one could claim that it needs some reinforcement.

35786770852_332cbe66a4_c.jpg

Is it even road legal to have the tires sticking out of the vehicle?! I wonder how it looks if you position the panels 1L farther to the outside.

35143852213_4a4f4e665f_c.jpg

This is how the vehicle looks from the back (sorry for the mirrors). As you can see I have attached both chains to the rear end of the vehicle, instead of one to the side.

35176598573_6afbd8ea18_c.jpg

From the rear you can easily see the chassis underneath.

35147015134_6fc809ed87_c.jpg

The bottom shot of the chassis shows the old style center differential and the pendular axles. A couple of soft springs on each side would have been nice.

35783289232_a9271035ca_c.jpg

Some extra pictures for your enjoyment.

35143852573_2970121171_c.jpg

35113267684_9daec8182f_c.jpg

35953769125_631f668cfe_c.jpg

35783289512_4c8c83b167_c.jpg

FEATURES AND FUNCTIONS

Now that we have built the model and we know what it looks like. Let's talk about the functions. This model packs six functions powered by two motors.

  1. Steering
  2. Driving
  3. Rotate crane boom
  4. Raise/lower crane boom
  5. Raise/lower the hook
  6. Raise/lower the outriggers

Unfortunately you can't switch functions with the IR remote, so you need to change the functions manually, using two levers. Each lever is mounted on one side of the model.

35148474743_8b8fcddd3b_n.jpg 35569386590_21cfb85b1c_n.jpg

The left lever (the one on the driver's side) switches between the Driving Functions and Operator Functions. When you switch this lever to driving mode, the position of the second lever doesn't matter. 

STEERING

Instead of using a servo motor for steering, this truck is using the M Motor, which is also used for some other functions. Steering is very smooth and operates nicely. There is no return to center, but you hardly miss it. I really like the way this is implemented. Downside however is the turning radius. As with many Technic models, this model has a very wide turning radius. You need to go back and forth quite a few times to make a 180-degree turn in a somewhat confined space. 

Here are two video's demonstrating the steering mechanism.

 

 

DRIVING

Because of the weight of the vehicle, it's geared down using a 8T on a 24T gear in the portal hub. So, don't expect spectacular performance when it comes to top speed. It does have proper torque and it drives smoothly. Using an XL Motor instead of an L motor results in the model coasting when you release the "throttle", instead of abrubtly coming to a halt. All in all I am quite happy with the ability to drive (and steer) this model. Here's a short video of driving the truck:

 

Since I am not really interested in Truck Trial and/or outdoor operation, I won't go into much detail about how suitable this model is for that. If you are interested in that, I can highly recommend watching the video review of our top video reviewer Sariel. What I do like to address is the inability of the IR system to be operated outside. I have never done truck trial or other outdoor PF IR related activities, but it just not possible to operate the model outside of your home. I never really realised that this was a big issue, but when you buy a € 279 RC set you probably expect it to work in your garden as well. Makes me wonder how many calls have been answered by TLG's customer service regarding this matter. It's time for TLG to step up their game and come up with a better solution.

OPERATING THE CRANE AND OUTRIGGERS

When you switch the lever on the driver's side to upper position you are engaging the non-driving functions of the model. That is operating the crane functions and the outriggers. When you are using this mode you are depending on the second lever to select the functions you want to operate. It's either the outriggers combined with lowering/raising the boom or rotating the crane and raising/lowering the hook. This takes a bit of getting used to, but I found this model easier to operate than the Arocs, which uses a similar approach. The following video demonstrates the operator functions:

 

One thing that kind of bugged me during operating the outriggers is the fact that a 7L axle has been used and it has been stopped by two full bushes. This resulted in the outrigger getting stuck near the panel on the right side. I was surprised by this, since TLG usually makes sure that there is ample space for moving parts. I will be modding this by using an 6L axle and half bushes.

35789286952_64a5663b7a_c.jpg

MANUAL FUNCTIONS

Besides the motorised functions, this model has some manual functions like opening the doors and the bonnet. And according to TLG's website, it has moveable lights. They have yet to be found though. 

B-MODEL

The B-model of this set is what TLG calls an Research Explorer Vehicle. A polar vehicle comes to mind, but the big tires are more suitable for other types of environment. I am not sure what TLG is aiming at. Usually I don't really care for B-models and that's no different for this set. I would be happy to see someone build this vehicle and show us what it's all about. I will take a rain check.

PRICE

Now that we are almost at the end of this review you have probably noticed that I am rather enthusiastic about this set. Although we haven't found a clear explanation why this set has an MSRP of 279 euro. I was hoping we would find out during the review, but we haven't. Therefore, I am afraid we need to do some math to be able solve the mystery.

The most logical way to determine the price of a set is to compare it with similar sets. Other than the usual Technic elements, this set contains PF components and six big tires. Let's look at the Claas because of the tires, the Volvo L350F for the Power Functions and the Bucket Wheel Excavator because it has the same price.

  • Claas has 1977 pieces and has an MSRP of € 149. Four big tires, PF Battery Box and M Motor..
  • Volvo has 1636 pieces and has an MSRP of € 219. Lots of PF including 2 PF IR Receivers and 2 Transmitters, big tires and a big bucket.
  • BWE has 3929 pieces and has an MSRP of € 279. PF Battery Box and XL Motor.
  • 6x6 Truck has 1862 pieces and has an MSRP of € 279. More PF than BWE, but way less PF than Volvo.

So the BWE has over twice the number of parts, no PF Receiver or Transmitter and a single motor, but it still has the same price. You can argue that the BWE was actually cheap compared to other sets. Okay, let's call the BWE cheap and ignore it.

Leaves us with the Volvo to compare to, since that set has a lot of PF components. The volvo has the entire range of PF components, including 2 PF IR Transmitters and Receivers. So it has a lot more PF components than the 6x6 Truck. The Volvo has approximately 200 parts less than the 6x6 Truck. At around 10 cents a piece, this would make up for a maximum of € 20. The Volvo is € 60 cheaper and it has almost double the number of PF components. The Claas isn't overly expensive, so the price of the tires probably don't add extreme costs to producing the set. When looking at the price of other sets, I simply cannot explain why the 6x6 Truck should cost 279 euro. Therefore, I can only jump to the conclusion that this set is overpriced.

I'd say the price should be somewhere between the Claas (€ 149) and the Volvo (€ 219). € 149 + 2 tires and more PF components makes me feel like € 199, but no more than that, and definitely no € 279.

SUMMARY

When I first saw this set, I wasn't very thrilled about it. Even seeing it in Billund didn't change my mind. It's just a big truck which can drive and has yet another shade of blue. I do like big models and I do like the Claas tires, but it just didn't do it for me. Bright colors for a truck like this?!

BUILDING EXPERIENCE

16244195165_2b8d3e102f_m.jpg

During the first stages of the build it was clear that this set packs and interesting gearbox to operate some cool features. The set contains over 100 gears, so there obviously is interesting stuff going on. During the build we (I had some help during some of the building stages) made some serious mistakes. This wasn't because of the instructions. This was because it was late and we weren't paying enough attention. The funny thing is that this actually added some fun to the build. We had to take some stuff apart, and investigate where the problem originated. This was somewhat reminiscent of the good old days, where you sometimes had to puzzle your way through the build. So yeah, I really had fun during the build, even though I (we) made some very stupid mistakes.

DESIGN

15624316853_d44ef20b33_m.jpg

Dark azure is a very nice shade of blue. It's way better than medium azure or medium blue. Now let's hope that TLG makes a pick when it comes to blue and add some connectors to the mix. Some parts of the truck look very cool and some look unfinished. Especially the rear of the vehicle and the crane look unfinished. It feels that some modding needs to be done to complete this model. I have very much come to terms with the bright colors though and I have started to appreciate them.

What I don't get is the use of bright orange parts in the chassis. Why not throw in some dark azure if you need to use another color than grey. I can totally understand that TLG want to make the build process as understandable as possible, especially with the target audience in mind, but in some aspects they are overdoing it.

PLAYABILITY

16244195165_2b8d3e102f_m.jpg

Sometimes when I build a Technic model, the functions just don't seem to work properly. They look like a Proof of Concept, instead of actual working mechanisms. The good thing about this model is that the functions work properly. Steering, driving, operating the crane and the outriggers, everything works fine (except maybe the minor issue with the outriggers). Outdoor playability is virtually non-existent though. Don't expect your kids to have fun in the garden with this thing. They will get frustrated.

FEATURES

16244195165_2b8d3e102f_m.jpg

The main functions of the model are all operated by a remote control. Upside is that these functions work really well. Downside is that you still need to manually switch the functions, and you need to be inside. The outriggers are a blast to operate, they are so cool. 

PARTS

16056649378_cd53c51c69_m.jpg

In term of special parts this set isn't exactly special. You get six big tires, which you might already own four of, when you own the Claas. For existing PF users, it's mostly parts in new colors. If you are new to Technic or new to PF, this set is a pretty decent starter pack.

VALUE FOR MONEY

16244195335_035f18c4db_m.jpg

This is where things get ugly. The hefty price tag of € 279 is way too much. Around € 199 would have been reasonable, but € 279 is nowhere near reasonable.

VERDICT

After building the set and spending some time playing with it I can only come to the conclusion that I really like it. I am even thinking about modding this set and that is something I seldomly do. This set reminds me of the 42039, where I felt like the president of a fan club with very few members. Sometimes a set just works for me and this is such a set. And that's not because it's the best set right out of the box, but it has potential to have a lot of fun with it. Some sets are perfect, but you will hardly touch them after building. The real question is whether people will be forking out such an amount of money for a non-licensed set. 

6,8

Thanks you for reading this review. All pictures can be found here.

Share this post


Link to post
Share on other sites

Yet another great review!

Small typo:

40 minutes ago, Jim said:

I it supposed to have a meaning though...

Also, since it is so "yuge" I was wondering if you (or anyone who has it) would mind comparing it to the 42029. The cabins seem similar. If not, that's fine, I am just curious.

Edited by Offroadcreat1ons

Share this post


Link to post
Share on other sites

Excellent review as usual Jim.  Thank you for all of the effort and time that went into this.    The largest flaw that I see with the 42070 is the unfinished look - certainly more paneling on the bed and to hide the frame would have been nice and helped to justify the price.  A beefier-looking boom would have been nice as well.  A missing function is an extendable boom, something to think about for modifications.

By the way, did you and your friend have some "building-beverages" while building?  That would explain the rookie mistakes :laugh: 

Share this post


Link to post
Share on other sites

Excellent review, and exellent pictures!

I did spot a few mistakes:

1.  I motor, it should be XL motor.

2. "Yuge".

3. "Claas has 1977 pieces and has an MSRP of € 149. Four big tires, no pf.

Edited by Aventador2004

Share this post


Link to post
Share on other sites
Just now, JGW3000 said:

 

By the way, did you and your friend have some "building-beverages" while building?  That would explain the rookie mistakes :laugh: 

Define "some" :laugh:

Share this post


Link to post
Share on other sites
Just now, JGW3000 said:

by the way, did you and your friend have some "building-beverages" while building?  That would explain the rookie mistakes :laugh: 

Haa! Solved riddle, what is a beer from 1967........

Send lego a beer from '67!  And they will reveal the secret.

Share this post


Link to post
Share on other sites

Thank you for excellent review.

- why orange parts in the chassis? why yellow there too? (silly for C-modelability)

- why grey beam in the crane among all red?

 

49 minutes ago, Jim said:

 

 

Jim, please do you have any pictures without stickers? Thank you

Share this post


Link to post
Share on other sites
1 minute ago, JGW3000 said:

Excellent review as usual Jim.  Thank you for all of the effort and time that went into this.    The largest flaw that I see with the 42070 is the unfinished look - certainly more paneling on the bed and to hide the frame would have been nice and helped to justify the price.  A beefier-looking boom would have been nice as well.  A missing function is an extendable boom, something to think about for modifications.

PS definitely agree with you!

Share this post


Link to post
Share on other sites
Just now, J_C said:

- why orange parts in the chassis? why yellow there too? (silly for C-modelability)

I haven't got a clue. I didn't like that either. Would have loved to see dark azure instead.

Just now, J_C said:

- why grey beam in the crane among all red?

Jim, please do you have any pictures without stickers? Thank you

The liftarms seem to be color coded. So, you don't get any of the same length in dfferent colors :tongue:

Just now, J_C said:

Jim, please do you have any pictures without stickers? Thank you

Nope, sorry. I apply the stickers when I build.

Share this post


Link to post
Share on other sites
1 minute ago, Jim said:

Define "some" :laugh:

Some = as much as one person can carry, and still be able to open the door into house without dropping or breaking anything.  (For me, its two 16-bottle cases of Sam Adams) 

Share this post


Link to post
Share on other sites

Well done as usual Jim.

Having built a ton of simillar truck, I decided to skip this one... The only reason I wanted to get this set is for the tyres, outriggers and XL motor, but for such price I can get two Claas sets.

I also dislike how bare it looks, especially compared to 2017H1 models.

The designer went lazy in almost all areas, inculding suspension, function switching, number of motors, etc... Why couldnt they use same concept like 8043, where 4 motors control 6 functions? I think it would be a perfect solution.

And lets not even talk about that poor teddy...

Share this post


Link to post
Share on other sites
Just now, TechnicRCRacer said:

Quick question: Can it drive with the outriggers extended?

Sure!

Share this post


Link to post
Share on other sites

I haven't read the text just yet, but the photos....the phoooootoooos man :wub::wub::wub: - I could eat them, they're so good!!! Despite the set is what it is, this review is a real eye-candy from top to bottom!

Share this post


Link to post
Share on other sites

This review is excellent. The set, on the other hand, is poor. So much color barf, and so many missed chances to make it better.

Share this post


Link to post
Share on other sites
Just now, Zero (Zblj) said:

The designer went lazy in almost all areas, inculding suspension, function switching, number of motors, etc...

I wonder how much of the unfinished look is due to bean counters taking away parts from an already expensive set.  Maybe the boom had cladding, maybe the bed had a floor, maybe there was a beam under the door when the designer came up with his model.  I get the feeling that this set looked much better in the design stage than what ended up being produced.

@Jim Thanks for the review, I'm very excited for the differentials thanks to your pictures (I don't have any old-style ones yet). 

Share this post


Link to post
Share on other sites
Just now, BusterHaus said:

I wonder how much of the unfinished look is due to bean counters taking away parts from an already expensive set.  Maybe the boom had cladding, maybe the bed had a floor, maybe there was a beam under the door when the designer came up with his model.  I get the feeling that this set looked much better in the design stage than what ended up being produced.

That is something I was thinking of just a minute ago. Maybe there were indeed extra parts, but the weight needed to be reduced or something. 

Share this post


Link to post
Share on other sites
Just now, Jim said:

That is something I was thinking of just a minute ago. Maybe there were indeed extra parts, but the weight needed to be reduced or something. 

For that price they could have used 2Xl motors and some extra paneling and 2x4L liftarms under the doors.

Share this post


Link to post
Share on other sites
Just now, Zero (Zblj) said:

For that price they could have used 2Xl motors and some extra paneling and 2x4L liftarms under the doors.

True that!

This set is doing worse in the polls than every other set I have reviewed. It's even doing worse than the drag racer :look:

 

Share this post


Link to post
Share on other sites
Just now, Zero (Zblj) said:

For that price they could have used 2Xl motors and some extra paneling and 2x4L liftarms under the doors.

Maybe they removed the second motor to save weight!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.